Blue Pear Cut Lab Grown Diamond Halo Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 9

$797.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1.0 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Halo

Center

Pear Cut

Metal

Customizable

Setting

Halo

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	Details
Center diamond	Pear Cut · blue appearance · approx. 8.85 × 5.69 × 3.41 mm · approx. 1.00 ct
Halo diamonds	Approx. 20–22 round brilliant diamonds · approx. 0.25 ct total
Shoulder diamonds	Approx. 18–20 round brilliant diamonds · approx. 0.20 ct total
Total diamond weight	Approx. 1.45 ct · approx. 39–43 diamonds
Stone type	Lab Grown Diamond
Setting	Halo with three tapered center prongs, a single round-diamond surround and pavé shoulders
Band dimensions	Estimated 2.00 mm wide and 1.60 mm thick at the base
Shoulder width	Estimated 2.00–2.20 mm
Setting height	Estimated 6.5–7.0 mm
Finish · Occasion	High Polish · Engagement

Diamond details

Shape	Size	Qty	Weight (approx.)
Pear center	8.85 × 5.69 × 3.41 mm	1	1.00 ct
Round brilliant halo diamonds	Individual diameters not specified	Approx. 20–22	0.25 ct total
Round brilliant shoulder diamonds	Individual diameters not specified	Approx. 18–20	0.20 ct total
Total		Approx. 39–43	1.45 ct

The round accents have a combined estimated diameter range of 1.10–2.00 mm. Counts and weights are supplied by location, not by individual diameter.

At a glance

A blue pear-cut lab grown diamond halo engagement ring from Signora Jewels.

One approx. 1.00 ct pear, 8.85 × 5.69 × 3.41 mm, in a three-prong Halo setting; approx. 38–42 round accents total 0.45 ct.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Made to order in your chosen metal with a fixed, approximately 1.00 ct blue pear center.

Signora Jewels sets a blue pear inside a single row of white round diamonds in this halo engagement ring. Three tapered prongs hold the center.

The pear measures approximately 8.85 × 5.69 × 3.41 mm and weighs 1.00 ct. Another 0.20 ct of round diamonds runs along the shoulders.

Design highlights

Blue pear-cut center, approximately 1.00 ct and 8.85 × 5.69 × 3.41 mm
Single Halo of approximately 20–22 round diamonds totaling 0.25 ct
Approximately 18–20 round shoulder diamonds totaling 0.20 ct
Three center prongs, including one directly over the pear point
Scalloped outer diamond outline with pavé-set shoulders
Approximately 1.45 ct total across approximately 39–43 diamonds

Each outer halo stone makes a rounded bump in the pear-shaped border, rather than disappearing inside a smooth metal rim.

About Lab Grown Diamonds

The blue pear-cut lab grown diamond supplies approximately 1.00 ct of the 1.45 ct total; white round accents supply the rest.

Metal, Care & Fit

Yellow and rose gold outline the small halo prongs; white metals reduce that contrast. Brush around the graduated rounds using the care guidance.

FAQ

Does the 1.45 ct total refer to the blue pear alone?
The blue pear weighs approximately 1.00 ct, while the surrounding round diamonds contribute approximately 0.45 ct. The single halo accounts for 0.25 ct and the pavé shoulders for 0.20 ct.

How is the blue pear’s point held inside the single halo?
One tapered prong sits over the pear’s point, with two more holding its lower sides. The surrounding halo does not replace those center prongs. Remove the ring for lifting or activities that risk hard knocks to the exposed diamond face.

Does the 2.00 mm band establish a flush fit beside the blue pear halo?
The estimated 2.00 mm measurement describes the lower shank’s width, not clearance beside the pear-shaped head. Check a companion band against the completed setting, particularly near the halo’s pointed end and lower curve.

Where should I brush around the graduated round accents?
The halo and shoulders contain round accents within a combined estimated 1.10–2.00 mm diameter range. Brush gently around their individual prongs and along the scalloped halo edge with warm water and mild soap, then rinse thoroughly and pat dry without pulling cloth through the gaps.

Your cart is empty