Cushion Rose Cut Lab Grown Diamond Bezel Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 8

$479.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Cushion Cut · Bezel

Center

Cushion Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Bezel

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Center diamond	Elongated Cushion Rose Cut · approx. 9.51 × 7.10 × 2.49 mm · approx. 1.75 ct reference center	Choose from 1–4.5 ct, including the 1.75 ct reference
Accent diamonds	None · 0 stones · 0.00 ct	No accent diamonds across the center options
Total diamond weight	Approx. 1.75 ct · 1 stone	Matches the selected center weight
Stone type	Lab Grown Diamond	Lab Grown Diamond across all options
Diamond quality	F color · VS1 clarity	Same quality across center options
Setting	Bezel · broad continuous rim following the elongated cushion’s rounded corners	Same Bezel design; dimensions vary with center
Band	Plain polished shank with narrow shoulders meeting the bezel’s long sides	Same plain-band design
Finish · Occasion	High Polish · Engagement, Anniversary	All metal and center options

At a glance

An elongated cushion rose-cut lab grown diamond bezel engagement ring from Signora Jewels.

The approx. 1.75 ct reference center measures 9.51 × 7.10 × 2.49 mm and is bezel-set and , with no accent diamonds: 0 stones, 0.00 ct.

The ring is made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Your ring is made to order in your chosen metal with an elongated cushion rose-cut center from 1 to 4.5 ct.

Signora Jewels frames this elongated cushion rose-cut engagement ring with a broad bezel that follows the stone’s softened corners. There are no claw tips.

The reference center measures approximately 9.51 × 7.10 × 2.49 mm and weighs 1.75 ct. Its plain lower shank is estimated at 1.60 mm wide.

Design highlights

Elongated cushion rose-cut reference center, approximately 1.75 ct and 9.51 × 7.10 × 2.49 mm
Center choices from 1 to 4.5 ct, including 1.75 ct
Bezel setting with a broad continuous rim and rounded corners
Broad triangular facets visible across the center, without projecting prongs
Plain polished lower shank, estimated at 1.60 mm wide and 1.60 mm thick for the reference design
No halo, side diamonds or diamond-set shoulders

The rim meets the narrow shoulders midway along the longer sides, leaving a clear step in width between the center frame and band.

Diamond & Ring Details

Specification	Details
Reference center	Elongated Cushion Rose Cut · approx. 9.51 × 7.10 × 2.49 mm · approx. 1.75 ct
Center options	1 ct, 1.5 ct, 1.75 ct, 2 ct, 2.5 ct, 3 ct, 3.5 ct, 4 ct, 4.5 ct
Reference total weight / count	Approx. 1.75 ct · 1 diamond
Accent diamonds	None · 0 stones · 0.00 ct
Setting	Bezel with a continuous rim around all four rounded corners
Band width at base	Estimated 1.60 mm for the reference design
Band thickness at base	Estimated 1.60 mm for the reference design
Shoulder width	Estimated 1.65–1.80 mm for the reference design
Setting height	Estimated 3.8–4.3 mm for the reference design
Finish	High Polish

Measurements are approximate references for the 1.75 ct design; final dimensions vary with the selected center.

About Lab Grown Diamonds

One elongated cushion rose-cut lab grown diamond supplies the selected total weight, with no halo or shoulder stones.

Metal, Care & Fit

Yellow and rose gold emphasize the broad rim; white metals reduce that color contrast. Brush gently around its rounded corners using the care guidance.

FAQ

What does the bezel cover around the elongated cushion’s corners?
The bezel surrounds the full perimeter, including all four rounded corners, with a continuous metal rim. The broad rose-cut face remains exposed, so protect it from hard knocks even though the edge is covered.

Is 2.49 mm the height of the finished cushion bezel setting?
The 2.49 mm measurement is the reference diamond’s depth, not the height of the finished setting. Setting height is estimated at 3.8–4.3 mm for the 1.75 ct design. The diamond and setting dimensions vary with other center choices.

Will a straight wedding band sit flush beside the broad cushion bezel?
The estimated 1.60 mm width describes the lower shank, not clearance beside the broader bezel. Compare a companion band against the completed setting to check that it does not press against the rim or diamond; the lower-shank measurement alone does not establish a flush fit.

How should I clean the inner corners of this rose-cut bezel?
The continuous bezel creates a metal-to-stone junction around the elongated cushion, including its rounded corners. Use warm water, mild soap and a soft brush along that junction and across the broad facets, then rinse thoroughly and pat dry. Do not push pointed tools beneath the bezel edge.

Your cart is empty