Your cart is empty
Begin with one of our most-loved collections and find a piece made for you.
Shop best sellers- Made to order in Surat
- Insured international delivery
- Secure Shopify checkout
Added:
Cart Error
Drawer menu
Your cart (0)
Begin with one of our most-loved collections and find a piece made for you.
Shop best sellers
1 of 9An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.
| Detail | Reference Design | Customizable |
|---|---|---|
| Center diamond | Dutch Marquise Cut · 13.5 × 6.8 mm · 2.50 ct | 1–4.5 ct |
| Accent diamonds | None · 0.00 ct | No accent stones |
| Total diamond weight | 2.50 ct · 1 diamond | Varies with center selection |
| Stone type | Lab Grown Diamond | Dutch Marquise Cut |
| Setting | Full Bezel with fine milgrain detailing | Made for selected center |
| Shoulders | Engraved filigree with raised cathedral support | High Polish |
| Gallery | Raised architectural open gallery | Reference height 6.5–7.0 mm |
| Finish | High Polish | Metal selection |
A Dutch marquise cut lab grown diamond bezel engagement ring from Signora Jewels.
One elongated 13.5 × 6.8 mm center weighing 2.50 ct in the reference design, secured by a continuous pointed bezel.
No accent diamonds or halo; fine beaded metal detailing traces the bezel and engraved filigree decorates the shoulders.
Available in silver, 10K/14K/18K yellow, white or rose gold and platinum, with selectable center diamond weight.
The metal follows every angle of the center diamond, including both sharp points. Signora Jewels sets a 13.5 × 6.8 mm Dutch marquise inside a continuous bezel that forms a pointed geometric frame. A narrow line of milgrain dots runs along the border, adding texture without using additional stones.
Look across the shoulders and you'll see curling engraved vines held between fine beaded edges. The cathedral arms rise toward the bezel, while the gallery remains open underneath. The reference center weighs 2.50 ct; it is the only diamond in the design. The lower shank narrows to approximately 1.80 mm.
Design highlights
The head rises approximately 6.5–7.0 mm, with shoulders measuring 2.2–2.6 mm across the decorative section. The bezel gives the stone a strong outline while keeping the shank relatively narrow. Explore our engagement rings, browse more diamond rings, or read the diamond and stone guide.
Choose silver, 10K, 14K or 18K yellow, white or rose gold, or platinum. The continuous bezel shields the pointed ends of the marquise, but the raised head can still contact fitted clothing. Clean around the small milgrain details and recessed scrollwork using warm water, mild soap and a soft brush. Rinse thoroughly and dry with a lint-free cloth.
Are both pointed ends protected by metal? Yes. The full bezel follows the complete Dutch marquise outline, including the upper and lower points.
Does this ring contain any side diamonds? No. The design contains one center diamond only. All small details around the bezel and shoulders are decorative metalwork.
Is the beaded border a diamond halo? No. The border is milgrain metal detailing rather than a row of diamonds. It outlines the pointed bezel.
Can I choose a different center diamond weight? Yes. The center is customizable from 1 ct to 4.5 ct, including the 2.50 ct reference. The bezel is made to fit the selected diamond.
How should I clean the engraved shoulders? Use warm water, mild soap and a soft brush, working gently along the scrolls and beaded edges. Dry carefully so residue does not collect in the narrow recesses.