Iris Dutch Marquise Lab Grown Diamond Three-Stone Ring

IGI Report IncludedMade to OrderInsured Delivery

Dutch Marquise Lab Grown Diamond Three-Stone Ring with Pear Side Diamonds in Yellow Gold

1 of 8

$789.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

For ChristmasOrder by Monday 30 November for delivery before 25 December. Holiday gift guide

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Marquise Cut · Three Stone

Center

Marquise Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Three Stone

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Center diamond	Dutch Marquise Cut · 11.50 × 5.59 mm · approx. 1.50 ct	1–4.5 ct
Side diamonds	2 pear cut diamonds · approx. 0.34 ct total	Three-Stone layout
Total diamond weight	approx. 1.84 ct · 3 diamonds	Varies with selected center
Stone type	Lab Grown Diamond	—
Setting	Four-Prong Three-Stone with pear side diamonds and open gallery	—
Finish · Occasion	High Polish · Engagement, Anniversary	—

Diamond details

Shape	Size	Qty	Weight (approx.)
Dutch Marquise Cut	11.50 × 5.59 mm	1	1.50 ct
Pear Cut	Not specified	2	0.34 ct total
Total	—	3	1.84 ct

At a glance

A Dutch marquise lab grown diamond three-stone engagement ring from Signora Jewels.

A 1.50 ct, 11.50 × 5.59 mm Dutch marquise center is flanked by 2 pear diamonds totaling approx. 0.34 ct. Approx. 1.84 ct total.

Made to order in 11 metals: silver, 10K/14K/18K gold (yellow, white, rose) and platinum.

Choose your center weight and metal for this made-to-order ring.

Signora Jewels sets the 11.50 × 5.59 mm Dutch marquise between two pear side diamonds, creating a clean three-stone ring with no pavé competing for attention. Each pear points inward toward the elongated center, then tapers into the slim polished shank.

The open gallery rises approximately 6.3–6.8 mm. At the base, the band measures about 1.50 mm wide and 1.80 mm thick, keeping the lower shank light beneath the broader three-stone top.

Design highlights

1.50 ct Dutch marquise center in the reference design
Center measures approx. 11.50 × 5.59 mm
2 pear cut side diamonds totaling approx. 0.34 ct
Four-Prong Three-Stone center setting
Open gallery with tapered shoulders
Approx. 1.84 ct total diamond weight

The pear sides broaden the ring exactly where the Dutch marquise reaches its widest point. Their pointed ends echo the center without copying its long outline, so all three diamonds read separately while still forming one balanced top.

Diamond & Ring Details

Specification	Details
Center stone	Dutch Marquise Cut · 11.50 × 5.59 mm · approx. 1.50 ct in the photos
Side stones	2 pear cut diamonds · approx. 0.34 ct total
Total diamond weight	approx. 1.84 ct in the photographed configuration
Diamond count	3
Setting	Four-Prong Three-Stone with pear side diamonds and open gallery
Center options	1, 1.5, 2, 2.5, 3, 3.5, 4 and 4.5 ct
Finish	High Polish

Measurements are approximate; your selected center weight sets the final diamond dimensions and total weight.

About Lab Grown Diamonds

The Dutch marquise carries its visual spread along the finger, while the pear side stones add width beside its center without interrupting the pointed outline. Read more about elongated shapes in the diamond stone guide.

Metal, Care & Fit

White gold and platinum keep the three settings visually close to the diamonds; yellow and rose gold create stronger contrast around the pear sides. Compare choices in the metal guide. Clean beneath the open gallery and around all three settings with warm water, mild soap and a soft brush.

FAQ

What makes the Dutch marquise different in this three-stone ring?
The 11.50 × 5.59 mm reference center has a long pointed outline with more geometric shoulders than a standard marquise. The pear sides soften that geometry without covering it.

How much diamond weight is in the pear side stones?
The two pear diamonds total approximately 0.34 ct. Combined with the 1.50 ct reference center, the photographed configuration totals approximately 1.84 ct.

How is the center held?
The Dutch marquise uses a Four-Prong center setting with support at its exposed points and sides. The open layout keeps most of the center outline visible from above.

How high does the center sit?
The reference setting rises approximately 6.3–6.8 mm. That leaves an open gallery beneath the center and separates the stones from the tapered shoulders.

Will this ring sit flush beside a straight wedding band?
The pear side settings occupy some space beside the center, so a straight band can leave a slight gap. A contoured band follows the three-stone profile more closely.

Your cart is empty