Elongated Hexagon Cut Lab Grown Diamond Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 9

$1,259.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 2.0 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Cut · Cluster

Center

Cut

Metal

Customizable

Setting

Cluster

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	Details
Center diamond	Elongated Hexagon Step Cut · 12.94 × 5.71 mm · approx. 2.00 ct
Accent diamonds	8 diamonds · approx. 0.21 ct total
Total diamond weight	approx. 2.21 ct · 9 stones
Stone type	Lab Grown Diamond
Setting	Six-Prong center with Cluster shoulders
Finish · Occasion	High Polish · Engagement

Shape	Size	Qty	Weight (approx.)
Elongated Hexagon Step Cut	12.94 × 5.71 mm	1	2.00 ct
Marquise	—	2	0.11 ct total
Round Brilliant	—	6	0.10 ct total
Total	—	9	2.21 ct

At a glance

An elongated hexagon lab grown diamond engagement ring from Signora Jewels.

A 2.00 ct, 12.94 × 5.71 mm elongated hexagon step cut sits in a Six-Prong setting, with 2 marquise and 6 round accent diamonds totaling approx. 0.21 ct. Approx. 2.21 ct total.

Made to order in 11 metals: silver, 10K/14K/18K gold (yellow, white, rose) and platinum.

Each metal color is shown in the photos. Choose your metal in the options on this page.

Signora Jewels builds this engagement ring around a 12.94 × 5.71 mm elongated hexagon step cut held by six prongs. The stone runs north to south, with pointed ends and long step facets that read in broad flashes rather than pinfire sparkle. An open gallery lifts the center clear of the finger, so light can move through the body of the stone.

On each side, marquise and round diamonds form small floral clusters that soften the geometry of the center without surrounding it in a halo. The lower shank stays slim at about 1.80 mm wide and 1.40 mm thick, so the ring feels lighter on the hand than the 2.00 ct center suggests.

Design highlights

2.00 ct elongated hexagon step cut center
Center measures approx. 12.94 × 5.71 mm
2 marquise and 6 round accent diamonds, approx. 0.21 ct total
Six-Prong center setting with open gallery
Nature-inspired Cluster shoulders with floral and leaf influence
Slim polished shank, approx. 1.80 mm wide at the base

The center does most of the talking here. Step-cut facets throw wider flashes than a round brilliant, and the long hexagon outline stays crisp against the softer marquise-and-round clusters at the shoulders. For cut, grading and stone basics, see the diamond stone guide.

About Lab Grown Diamonds

An elongated hexagon step cut has long mirror-like facets, so you see larger bands of light and contrast across the face of the stone. That cleaner facet pattern works especially well in a 12.94 mm long center, where the shape itself is part of the look.

Metal, Care & Fit

This ring is made in silver, 10K, 14K and 18K yellow, white or rose gold, plus platinum. White metals sharpen the edges of the step cut and keep the side clusters visually bright, while yellow or rose gold puts more warmth around the center. Compare them in the metal guide. Clean the open gallery and the small spaces around the cluster accents with warm water, mild soap and a soft brush.

FAQ

How does an elongated hexagon step cut look in person?
Step cuts show broader flashes of light instead of the pinfire sparkle you get from a round brilliant. On a 12.94 × 5.71 mm stone, that gives the center a cleaner, longer face with a strong outline.

Are the marquise side diamonds exposed?
The marquise accents sit lower than the center and are built into the Cluster shoulders. The six-prong center rises above them, so the side stones read as supporting detail rather than taking over the top view.

Will this ring sit flush with a straight wedding band?
Most straight bands will leave a small gap. The center basket and shoulder clusters occupy the space next to the ring, so a curved or contoured band usually sits closer.

Which metal suits this design best?
White gold and platinum make the step-cut center and the round accents read brighter and more continuous. Yellow or rose gold adds contrast around the diamonds and makes the floral cluster shoulders stand out more clearly.

How does this ring feel on the hand?
The lower shank is approximately 1.80 mm wide and 1.40 mm thick. That keeps the ring relatively light, even with a 2.00 ct center and shoulder clusters on both sides.

Your cart is empty