Emerald Cut Lab Grown Diamond Halo Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 9

$1,148.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Emerald Cut · Halo

Center

Emerald Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Halo

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Center diamond	Emerald · 6.8 × 4.8 mm · approx. 1.00 ct	1–4.5 ct
Accent diamonds	40 round diamonds · approx. 0.26 ct total	Scales with center
Total diamond weight	approx. 1.26 ct · 41 stones	Varies with selected center
Stone type	Lab Grown Diamond	—
Setting	Four-Prong with Double Halo	Scales with center
Band	Twisted pavé shoulders with milgrain detailing	—
Finish · Occasion	High Polish · Engagement, Anniversary, Bridal	—

Diamond details

Shape	Size	Qty	Weight (approx.)
Emerald center	6.8 × 4.8 mm	1	1.00 ct
Round halo diamonds	—	26	0.18 ct total
Round band diamonds	—	14	0.08 ct total
Total	—	41	1.26 ct

At a glance

An emerald cut lab grown diamond double halo engagement ring from Signora Jewels.

The photographed design centers a 1.00 ct emerald cut measuring approximately 6.8 × 4.8 mm in a four-prong setting, surrounded by 40 round halo and shoulder diamonds totaling approximately 0.26 ct. Approx. 1.26 ct total.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Each metal color is shown in the photos. Choose a 1 ct, 1.5 ct, 2 ct, 2.5 ct, 3 ct, 3.5 ct, 4 ct or 4.5 ct center and your preferred metal from the options on this page.

Signora Jewels starts with the straight edges of a 6.8 × 4.8 mm emerald cut, then builds a softer frame around them. Four corner prongs leave the long step-cut facets open, while 26 small rounds trace the cushion-rectangular halo around the photographed 1.00 ct center.

Fine milgrain follows the shaped outer border. Another 14 rounds continue into the twisted shoulders, where diamond-set loops cross polished metal before the shank settles to approximately 2.10 mm wide at the bottom. The reference setting stands about 7.10 mm high.

Design highlights

Emerald center options: 1 ct, 1.5 ct, 2 ct, 2.5 ct, 3 ct, 3.5 ct, 4 ct or 4.5 ct
1.00 ct reference center measuring approximately 6.8 × 4.8 mm
26 round halo diamonds totaling approximately 0.18 ct
14 round shoulder diamonds totaling approximately 0.08 ct
Cushion-rectangular double halo with a fine milgrain border
Twisted pavé shoulders reaching approximately 3.40 mm near the setting

The emerald cut stays visibly rectangular even inside a detailed frame. Its long step facets draw the eye through the center, while the small rounds break that geometry into shorter flashes around the perimeter. The twisted shoulders continue the pattern without adding another solid row of metal. Browse more halo engagement rings, compare cuts in the diamond stone guide, or review the metal guide.

Diamond & Ring Details

Specification	Details
Center stone	Emerald · 6.8 × 4.8 mm · approx. 1.00 ct in the photographed design
Halo diamonds	26 round diamonds · approx. 0.18 ct total
Band diamonds	14 round diamonds · approx. 0.08 ct total
Total weight / count	approx. 1.26 ct · 41 stones in the photographed design
Setting	Four-Prong with Double Halo
Band	Twisted pavé shoulders with milgrain detailing
Band details	Approx. 2.10 mm lower width · 1.80 mm lower thickness · 3.40 mm shoulder width
Setting height	Approx. 7.10 mm at the 1.00 ct reference weight
Center options	1 ct, 1.5 ct, 2 ct, 2.5 ct, 3 ct, 3.5 ct, 4 ct, 4.5 ct
Finish	High Polish

Measurements are approximate. The selected center weight determines the final diamond dimensions, halo proportions and total diamond weight.

About Lab Grown Diamonds

The emerald cut uses long, stepped facets rather than the smaller facet pattern of the surrounding rounds. At the photographed 1.00 ct weight, the center measures approximately 6.8 × 4.8 mm. That contrast in facet pattern keeps the rectangular center visually separate from the 40 smaller diamonds around it.

Metal, Care & Fit

The reference construction uses approximately 6.00 g of 18K gold before the diamonds are set. Yellow and rose gold put more contrast around the milgrain frame; white gold and platinum keep the halo closer in tone to the stones. Clean from both sides with warm water, mild soap and a soft brush, paying attention to the small openings around the halo and twisted shoulders.

FAQ

What does the double halo do around this emerald cut?
Twenty-six round diamonds totaling approximately 0.18 ct form the cushion-rectangular frame around the center. The rounded outer shape increases the visible spread while leaving the straight 6.8 × 4.8 mm reference center clearly defined.

How is the emerald center held?
Four corner prongs secure the emerald cut while leaving its long sides open. The arrangement keeps metal away from the broad step-cut face of the photographed 1.00 ct center.

What do the twisted pavé shoulders add?
Fourteen round diamonds totaling approximately 0.08 ct continue the diamond work into the band. The pavé sections twist with polished metal and milgrain edges before narrowing into the approximately 2.10 mm lower shank.

How high does the 1 ct reference setting sit?
The photographed setting is approximately 7.10 mm high. The head scales with the selected emerald center as you move through the available carat options.

How should I clean the halo and twisted shoulders?
Use warm water, mild soap and a soft brush from the top and underside. Work gently around the 40 small accent diamonds and milgrain edges, where lotion and soap residue can collect.

Common questions

Ring questions, answered

Timing, shipping, certification and return eligibility for made-to-order rings.

Still deciding? Talk to a Signora jeweler — free, and no obligation. Book a consultation →

Answers last updated August 2, 2026

When will my order ship?

Standard listed pieces are made to order with an estimated dispatch of 7 business days. Use the product-page estimate when it is more specific and the timing confirmed after ordering. Delivery timing begins after dispatch and varies by destination and carrier service. Fully custom commissions follow the production schedule confirmed with their approved specifications or CAD.

When is insured worldwide delivery free?

Orders of US$500 or more receive free express, insured and tracked worldwide delivery. Below US$500, express, insured and tracked worldwide delivery is charged at the fixed rate shown at checkout.

Will I have to pay import duties?

For every destination available at checkout, Signora prepays applicable import duties and import taxes. Customers should not be asked to pay those import charges again on delivery.

What certificate comes with my jewelry?

Every finished piece includes a Signora Jewelry Certificate. Each selected individual lab-grown center or primary diamond of 0.50 ct or above includes an IGI grading report. Below 0.50 ct, IGI can be arranged by custom request. Custom moissanite and gemstone selections include GRA documentation, with the exact scope confirmed in the approved specifications. The product page or approved specifications state the exact laboratory, report type and scope.

Can I return a made-to-order listed design?

Standard listed products are eligible for return within 30 days after carrier-recorded delivery when unworn, unused and in their original condition, with the original packaging and included documents. Normal listed choices such as metal, stone carat, chain or bracelet length, an extended ring size, or complimentary engraving do not by themselves make an item Final Sale. A sale or discount also does not imply Final Sale; only an item explicitly classified as Final Sale follows the non-returnable exclusion.

How are fully custom orders handled?

A fully custom commission is different from a listed made-to-order design. After its specifications or CAD are approved, a normal change-of-mind return does not apply. Manufacturing defects remain reviewable. Signora may accept an exceptional non-defect return case by case; documented labor and genuinely non-recoverable costs may be deducted, but these deductions are not a restocking fee.

Your cart is empty