Emerald Lab Grown Diamond Pear & Marquise Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

emerald lab grown diamond pear marquise ring in yellow gold

1 of 12

$800.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Emerald Cut · Pavé

Center

Emerald Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Pavé

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Ring style	Asymmetric floral side-stone engagement ring	Made to order
Center diamond	Emerald · approx. 11.00 × 8.00 mm · 4.00 ct	Choose 1–4.5 ct
Accent diamonds	68 pear, marquise and round lab grown diamonds · approx. 1.092 ct	Scaled to suit the selected center
Total diamond weight	Approx. 5.092 ct · 69 diamonds	Varies with the selected center
Stone type	Lab Grown Diamond	Lab Grown Diamond
Setting	Four-claw center, prong-set pear and marquise cluster, multi-row pavé shoulders	Setting proportions adjust with the center size
Reference size	US 8	Choose your ring size
Finish	High Polish	High Polish
Occasion	Engagement, Bridal, Anniversary	Made to order for you

Diamond details

Shape	Size	Qty	Weight (approx.)
Emerald center	11.00 × 8.00 mm	1	4.000 ct
Pear side accents	4.50 × 2.80 mm	2	0.300 ct
Pear side accent	4.00 × 2.50 mm	1	0.100 ct
Marquise side accent	5.00 × 2.50 mm	1	0.100 ct
Round pavé accents	1.30 mm	40	0.400 ct
Round pavé accents	1.20 mm	24	0.192 ct
Total	—	69	5.092 ct

At a glance

An emerald Lab Grown Diamond pear and marquise engagement ring from Signora Jewels.

The reference design holds a 4.00 ct, 11.00 × 8.00 mm emerald center in four claws, with 68 pear, marquise and round accents totaling approx. 1.092 ct; the center diamond is

Made to order in 11 metals: silver, 9K/14K/18K gold in yellow, white or rose, and platinum.

Made to order — the price updates with your center-diamond and metal selections. Read the engagement ring guide before choosing your stone.

This emerald Lab Grown Diamond engagement ring from Signora Jewels does not mirror itself from side to side. Four shaped diamonds rise from one shoulder like a small branch, while three rows of round pavé carry light around the opposite side and beneath the cluster.

The 11.00 × 8.00 mm center sits upright in four corner claws. Its long step facets throw broad flashes across the table, then the pear and marquise accents break that light into quicker points. The raised branch clears the center basket, so each shaped diamond remains visible instead of disappearing behind the emerald cut.

Design highlights

Emerald center shown at approx. 4.00 ct and 11.00 × 8.00 mm
Four-claw center setting leaves the cut corners open to light
Two 4.50 × 2.80 mm pear diamonds form the upper branch
One smaller pear and one marquise complete the asymmetric cluster
64 round diamonds run through the multi-row pavé shoulders
Approx. 1.092 ct of accent diamonds around the center
Reference measurements and metal weights are based on US size 8
Choose from 11 metal and color combinations

Seen from above, the stepped center remains the anchor. The branch climbs beyond one corner rather than wrapping the stone in a regular halo, giving the ring a directional outline that catches the eye before the pavé takes over along the band.

Diamond & Ring Details

The photos use a 4.00 ct emerald center measuring approx. 11.00 × 8.00 mm. Select 1, 1.5, 2, 2.5, 3, 3.5, 4 or 4.5 ct; the basket, side cluster and shoulder proportions are adjusted for the chosen diamond.

The reference measurements and metal weights are based on US size 8. Check the ring size and fit guide before ordering.

About Lab Grown Diamonds

Lab grown diamonds have the same carbon crystal structure, hardness and optical properties as mined diamonds. They are graded on the same 4C scale, and the selected center ships with an independent grading report.

An emerald cut reflects light in long, orderly steps rather than the splintered sparkle of a round cut. The pear, marquise and pavé accents add the smaller flashes around those broad reflections.

Metal, Care & Fit

Choose silver, 9K, 14K or 18K gold in yellow, white or rose, or platinum. Compare color, gold content, weight and daily wear in the metal guide.

Clean the ring with warm water, mild soap and a soft brush. Work beneath the center basket and around the raised branch, then rinse and pat dry. Remove it before lifting weights, gardening or doing work that can catch the elevated side cluster.

FAQ

What diamond weight is shown in the photos?
The photos show a 4.00 ct emerald center with approximately 1.092 ct of pear, marquise and round accents. The complete reference design contains 69 diamonds totaling approximately 5.092 ct.

Can I choose a different center-diamond size?
Yes. The emerald center is available in 1, 1.5, 2, 2.5, 3, 3.5, 4 and 4.5 ct. The basket and asymmetric side arrangement are scaled around the selected center.

Is the floral branch symmetrical on both sides?
No. The shaped-diamond branch rises above one side of the center, while the opposite shoulder carries the pavé line without a matching upper cluster. That imbalance is the defining detail of this design.

How are the pear and marquise diamonds arranged?
Four shaped diamonds form the side branch: two 4.50 × 2.80 mm pears, one 4.00 × 2.50 mm pear and one 5.00 × 2.50 mm marquise. Each is held in an open prong setting.

What is the difference between an emerald cut and a round cut?
An emerald cut returns broad flashes through long step facets, while a round cut breaks light into many smaller flashes. This ring uses both effects, with the emerald center framed by round pavé and pointed side stones.

What is the difference between 9K and 18K gold?
9K gold contains less pure gold and uses a firmer alloy, while 18K has richer gold color and greater density. Both are solid gold, and 14K sits between them in color, weight and wear resistance.

Will the raised side cluster catch on clothing?
The raised pear and marquise branch has more exposed edges than a plain solitaire. Wear it with care around loose knits, lace and gloves, and remove it for work that can pull against the prongs.

Does the center diamond come certified?
Yes. The selected center ships with an independent grading report, and Signora Jewels sends the completed ring fully insured, tracked and signature-required.

Your cart is empty