Emerald Lab Grown Diamond Three-Stone Pavé Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

emerald diamond three-stone pavé ring in yellow gold

1 of 12

$712.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Emerald Cut · Three Stone

Center

Emerald Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Three Stone

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Ring style	Emerald three-stone engagement ring with pavé shoulders	Included as shown
Center diamond	Emerald · 8.00 × 5.00 mm · approx. 1.75 ct	Yes — 1 to 4.5 ct
Emerald side stones	2 diamonds · 5.00 × 3.00 mm · approx. 0.600 ct	Included and scaled with the center
Pavé diamonds	16 round diamonds · 1.40 mm · approx. 0.192 ct	Included as shown
Total diamond weight	Approx. 2.542 ct · 19 diamonds	Varies with center size
Stone type	Lab Grown Diamond	Lab Grown Diamond
Setting	Four-prong emerald settings with U-cut pavé shoulders	Scaled to suit the selected center
Metal & color	Rose gold shown	Yes — 11 options
Finish	High Polish	Included
Occasion	Engagement, Anniversary	—

Diamond details

Shape	Size	Qty	Weight (approx.)
Emerald center	8.00 × 5.00 mm	1	1.750 ct
Emerald side stones	5.00 × 3.00 mm	2	0.600 ct
Round pavé diamonds	1.40 mm	16	0.192 ct
Total	—	19	2.542 ct

At a glance

An emerald Lab Grown Diamond three-stone engagement ring from Signora Jewels.

As shown: a 1.75 ct, 8.00 × 5.00 mm emerald center with two emerald side stones and 16 round pavé accents.

Nineteen diamonds total approx. 2.542 ct, including approx. 0.792 ct of accent diamonds.

Made to order in silver, 9K/14K/18K yellow, white or rose gold, and platinum.

Made to order — the price updates with your selection. Change the center size, side-stone proportions or shoulder coverage through our custom jewelry service.

Signora Jewels sets the 8.00 × 5.00 mm emerald center between two smaller emerald cuts, keeping all three long tables aligned across the finger. Four corner prongs hold each stone without interrupting the straight sides.

The 5.00 × 3.00 mm side stones step down cleanly from the center. Sixteen 1.40 mm rounds continue along the shoulders in U-cut settings, replacing the broad step-cut flashes with a tighter line of light before the plain lower shank begins.

The raised baskets leave open space beneath all three emerald cuts. From above, the stones form one architectural line; from the side, the setting gives a wedding band room to sit close.

Design highlights

Emerald Lab Grown Diamond center, approx. 1.75 ct as shown
Approx. 8.00 × 5.00 mm center dimensions
Two emerald side stones totaling approx. 0.600 ct
Sixteen round pavé diamonds totaling approx. 0.192 ct
Four-prong settings protecting the clipped corners
U-cut pavé along both shoulders
Approx. 2.542 ct total diamond weight as shown
Made to order in 11 metal and color combinations

The repeated emerald outlines are the defining detail. Their step facets create three broad flashes across the top, while the smaller pavé diamonds tighten the light pattern as the ring narrows toward the palm.

Diamond & Ring Details

Specification	Details
Center stone	Emerald · 8.00 × 5.00 mm · approx. 1.75 ct as shown
Emerald side stones	2 diamonds · 5.00 × 3.00 mm · approx. 0.600 ct
Pavé diamonds	16 round diamonds · 1.40 mm · approx. 0.192 ct
Total diamond weight	Approx. 2.542 ct across 19 diamonds as shown
Center setting	Four-prong emerald basket
Accent setting	Four-prong side-stone baskets and U-cut pavé
Reference size	India 17
Finish	High Polish

Measurements and weights are approximate. The baskets and metal weight scale with the center size selected.

About Lab Grown Diamonds

An emerald cut uses long step facets to create broad, measured flashes rather than the smaller scintillation of a brilliant cut. The two matching side stones repeat that pattern across the finger, while the round pavé adds finer sparkle along the shoulders.

Lab grown diamonds have the same carbon crystal structure, hardness and optical properties as mined diamonds. They are graded using the same cut, color, clarity and carat standards.

Metal, Care & Fit

Choose silver, 9K/14K/18K gold in yellow, white or rose, or platinum. 9K contains more strengthening alloy for daily wear, while 18K has higher gold content and richer color; compare them in the metal guide.

Order in your known size. The three emerald cuts spread farther across the finger than a solitaire, so accurate sizing helps keep the center upright; use the ring size and fit guide. Clean beneath the baskets and along the pavé shoulders with warm water, mild soap and a soft brush.

FAQ

Can I choose another center diamond size?
Yes. The emerald center is available from 1 to 4.5 ct, and the baskets and metal weight scale to the selected carat. The photographed configuration uses an approx. 1.75 ct center measuring 8.00 × 5.00 mm.

What is the total diamond weight?
The photographed configuration totals approximately 2.542 ct across 19 diamonds. That includes a 1.75 ct center and approximately 0.792 ct of emerald and round accent diamonds.

How are the three emerald diamonds arranged?
One 5.00 × 3.00 mm emerald diamond sits on each side of the 8.00 × 5.00 mm center. Their long sides run in the same direction, creating a graduated step-cut line across the finger.

How are the emerald-cut diamonds held?
Each emerald-cut diamond is held by four prongs positioned at its clipped corners. This protects the corners while leaving the long straight sides and step facets visible.

Will a wedding band sit beside this ring?
A straight wedding band sits close beneath the raised baskets. A small gap can remain beside the side-stone settings, while a gently contoured band follows the lower edge most closely.

How does an emerald cut compare with a round brilliant?
An emerald cut produces broad, mirror-like flashes from long step facets, while a round brilliant creates a tighter pattern of scintillation. This ring combines both effects through its emerald center and sides with round pavé shoulders.

What is the difference between 9K and 18K gold?
9K gold contains more strengthening alloy and has a harder surface, while 18K contains more gold and carries richer color. Both are solid gold choices for an engagement ring.

Are the diamonds included with the ring?
Yes. Signora Jewels includes the selected emerald center, the two emerald side stones and all 16 round pavé diamonds in the finished ring.

Your cart is empty