Marquise Cut Lab Grown Diamond Cluster Anniversary Ring

Signora Jewelry Certificate IncludedMade to OrderInsured Delivery

1 of 5

$560.00

Price updates with your selections

Product documentation Signora Jewelry Certificate Included A Signora Jewelry Certificate lists the finished-piece and material details supplied for this design. Finished-piece and material details · Signora Jewelry Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Marquise Cut · Cluster

Center

Marquise Cut

Metal

Customizable

Setting

Cluster

Detail	Details
Diamonds	7 marquise diamonds · 4.00 × 2.00 mm each
Diamond weight	Approx. 0.07 ct per stone · 0.49 ct total
Total diamond weight	Approx. 0.49 ct · 7 diamonds
Stone type	Lab Grown Diamond
Setting	Prong-set cluster with angled marquise diamonds
Design	Seven-stone upper band with a vertical central marquise and three angled diamonds on each side
Finish · Occasion	High Polish · Anniversary, Wedding, Everyday

At a glance

A marquise lab grown diamond cluster anniversary ring from Signora Jewels.

Seven marquise diamonds, each measuring 4.00 × 2.00 mm and weighing approximately 0.07 ct, arranged across the upper band. Approximately 0.49 ct total. Prong setting.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Choose your preferred metal from the options on this page. The diamond arrangement is fixed.

Seven marquise diamonds form a gently fanned arrangement across this Signora Jewels anniversary ring. The middle diamond stands vertically, while three stones on each side tilt outward to follow the curve of the finger. Each measures 4.00 × 2.00 mm and weighs approximately 0.07 ct.

The prong settings leave the sides of the diamonds open. Viewed from above, the pointed marquise shapes create a leaf-like pattern rather than a straight line of stones. The diamond-set upper section meets a plain polished shank, keeping the underside free of stones.

Explore more diamond rings or compare your options in our metal guide.

Design highlights

Seven marquise lab grown diamonds totaling approximately 0.49 ct
Each diamond measures 4.00 × 2.00 mm and weighs approximately 0.07 ct
Vertically positioned central marquise with three angled diamonds on each side
Leaf-inspired cluster arrangement across the upper band
Individual prong settings with open sides beneath the diamonds
Plain polished lower shank, available in 11 metal options

The direction of the stones gives this ring its character. The upright marquise marks the center, while the remaining six lean outward in mirrored groups. Their pointed ends create a repeating pattern across the finger without adding diamonds to the underside.

About Lab Grown Diamonds

The marquise cut has an elongated body and two pointed ends. Arranging seven identical marquise diamonds at different angles creates a leaf-like outline across the band.

All seven stones are lab grown diamonds with F color and VS1 clarity.

Metal, Care & Fit

Choose silver, platinum, or 9K, 14K or 18K gold in yellow, white or rose. The diamond-set upper section follows the curve of the finger, while the plain lower shank provides an uninterrupted metal surface underneath.

Clean with warm water, mild soap and a soft brush. Work gently between the angled marquise diamonds and beneath their settings, where residue collects. Follow our jewelry care guide for ongoing maintenance.

FAQ

Does this ring have diamonds all the way around?
No. Seven marquise diamonds cover the upper section of the band, while the underside remains plain polished metal. The diamond arrangement is concentrated across the visible part of the finger.

Are all seven marquise diamonds the same size?
Yes. Each diamond measures 4.00 × 2.00 mm and weighs approximately 0.07 ct. The different angles create the fanned appearance rather than differences in diamond size.

Why is the middle marquise positioned vertically?
The vertical middle diamond anchors the arrangement. Three diamonds on each side angle outward in mirrored groups, creating a leaf-like pattern across the band.

Can I stack this ring with an engagement ring?
The diamond-set section follows the curve of the finger and transitions into a plain lower shank. It can be stacked, although a raised engagement-ring head can create a gap between the two rings. A contoured band gives a closer fit.

How should I clean the spaces between the marquise diamonds?
The individual prong settings leave openings between adjacent stones. Use a soft brush with mild soapy water to clean around the pointed ends and underneath the diamonds. Have the prongs checked if any stone feels loose.

Your cart is empty