Marquise Lab Grown Diamond Vintage Milgrain Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 9

$1,093.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

For ChristmasOrder by Monday 30 November for delivery before 25 December. Holiday gift guide

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Marquise Cut · Vintage

Center

Marquise Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Vintage

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Center diamond	Marquise Cut · 13.27 × 6.69 mm · approx. 2.00 ct	1–4.5 ct
Accent diamonds	Marquise and round diamonds · approx. 0.50 ct total	Scales with center
Total diamond weight	approx. 2.50 ct	Varies with selected center
Stone type	Lab Grown Diamond	—
Setting	Vintage Milgrain with engraved shoulders and raised center setting	—
Finish · Occasion	High Polish · Engagement, Anniversary	—

Diamond details

Shape	Role	Weight (approx.)
Marquise Cut	Center · 13.27 × 6.69 mm	2.00 ct
Marquise Cut	Shoulder side stones	approx. 0.34 ct total
Round Cut	Shoulder and decorative accents	approx. 0.14 ct total
Round Cut	Hidden diamond beneath center	approx. 0.02 ct
Total accents	All accent diamonds	0.50 ct

At a glance

A marquise lab grown diamond vintage milgrain engagement ring from Signora Jewels.

A 2.00 ct, 13.27 × 6.69 mm marquise center sits above marquise and round accent diamonds totaling approx. 0.50 ct, including a hidden round diamond beneath the center. Approx. 2.50 ct total.

Made to order in 11 metals: silver, 10K/14K/18K gold (yellow, white, rose) and platinum.

Choose your center weight and metal for this made-to-order ring.

Signora Jewels sets the 13.27 × 6.69 mm marquise above engraved shoulders edged with fine milgrain. Marquise and round accents sit inside the vintage metalwork rather than forming a plain pavé row, while a hidden round diamond is tucked beneath the center setting.

The center rises approximately 6.5–7.0 mm. A 2.80 mm lower shank gives the ring more substance at the base, while the upper shoulders narrow around the elongated diamond and its decorative engagement ring setting.

Design highlights

2.00 ct marquise center in the reference design
Center measures approx. 13.27 × 6.69 mm
Marquise and round accents totaling approx. 0.50 ct
Hidden round diamond of approx. 0.02 ct beneath the center
Vintage Milgrain setting with engraved shoulder detail
Center customizable from 1 ct to 4.5 ct

The milgrain borders frame the shoulder engraving without crowding the center. From above, the marquise keeps a clean tip-to-tip outline; from an angle, the side stones and hidden diamond bring light into the carved metalwork.

Diamond & Ring Details

Specification	Details
Center stone	Marquise Cut · 13.27 × 6.69 mm · approx. 2.00 ct in the photos
Accent diamonds	Marquise and round diamonds · approx. 0.50 ct total
Hidden diamond	Round Cut · approx. 0.02 ct, included in accent total
Total diamond weight	approx. 2.50 ct in the photographed configuration
Setting	Vintage Milgrain with engraved shoulders and raised center setting
Center options	1, 1.5, 2, 2.5, 3, 3.5, 4 and 4.5 ct
Finish	High Polish

Measurements are approximate; your selected center weight sets the final diamond dimensions and total weight.

About Lab Grown Diamonds

The 13.27 mm marquise spreads its visual weight along the finger, while the smaller marquise and round accents add shorter flashes through the shoulders. See the diamond stone guide for more on elongated shapes and proportions.

Metal, Care & Fit

Yellow and rose gold make the engraving and milgrain edges easier to read; white gold and platinum keep more attention on the diamonds. Compare choices in the metal guide. Use warm water, mild soap and a soft brush around the recessed shoulder details and beneath the center setting.

FAQ

What gives this marquise ring its vintage look?
The shoulders combine engraved metalwork with fine milgrain borders. The diamond accents sit within that pattern instead of replacing it with a continuous pavé surface.

How much accent diamond weight is in the design?
The marquise and round accent diamonds total approximately 0.50 ct. That total includes the hidden round diamond beneath the center.

Where is the hidden diamond?
The approx. 0.02 ct round diamond sits beneath the marquise center setting. It is meant to be seen from the side rather than from the main face-up view.

How high does the center sit?
The center setting rises approximately 6.5–7.0 mm. That keeps the elongated marquise above the decorated shoulders and leaves space beneath the stone.

How should the milgrain and engraved shoulders be cleaned?
Use a soft brush over the recessed engraving and around the side diamonds. The small grooves beside the milgrain borders hold more residue than the polished lower band.

Your cart is empty