Oval Cut Lab Grown Diamond Bezel Men's Signet Ring

IGI Report IncludedMade to OrderInsured Delivery

Yellow gold oval lab grown diamond men's signet ring with partial bezel setting and flush-set shoulder diamonds.

1 of 5

$1,112.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Oval Cut · Bezel

Center

Oval Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Bezel

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Center diamond	Oval · 10.00 × 8.00 mm · approx. 3.00 ct	1–4.5 ct
Accent diamonds	6 round diamonds · 1.50 mm · approx. 0.09 ct total	Fixed accent layout
Total diamond weight	Approx. 3.09 ct · 7 diamonds	Varies with center size
Stone type	Lab Grown Diamond	F color · VS1 clarity
Setting	East-west bezel with flush-set shoulder accents	Same design
Finish · Occasion	High Polish · Anniversary, Wedding, Everyday	11 metal options

Diamond details

Shape	Size	Qty	Weight (approx.)
Oval center	10.00 × 8.00 mm	1	3.000 ct
Round accents	1.50 mm	6	0.090 ct
Total	—	7	3.090 ct

At a glance

An oval lab grown diamond bezel men's signet ring from Signora Jewels.

A 10.00 × 8.00 mm oval center weighing approximately 3.00 ct, positioned horizontally in a partial bezel. Six round shoulder diamonds add 0.09 ct, bringing the total to approximately 3.09 ct.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Choose your center diamond weight and preferred metal from the options on this page.

The oval sits horizontally across the finger in this Signora Jewels signet ring. Two curved sections of metal grip the diamond along its upper and lower edges, leaving the ends open. At 10.00 × 8.00 mm and approximately 3.00 ct, the photographed center occupies most of the ring's face.

The broad shoulders taper toward the underside. Three small round diamonds sit flush in each shoulder, following the narrowing metal rather than projecting above it. There are no exposed center prongs.

Explore our men's rings or compare your options in the metal guide.

Design highlights

East-west oval center diamond, approximately 3.00 ct in the photographed design
Customizable center diamond from 1 to 4.5 ct
Partial bezel grips the two long edges of the oval
Six round shoulder accents totaling approximately 0.09 ct
Flush-set accent diamonds arranged symmetrically, three per shoulder
Broad signet-style shoulders taper into a plain polished band

The horizontal setting changes how the oval wears. Its length runs across the finger, while the polished shoulders rise toward the bezel and frame the stone without an upright prong head. The six small diamonds remain recessed in the metal, adding detail without interrupting the ring's surface.

Diamond & Ring Details

Specification	Details
Center stone	Oval · 10.00 × 8.00 mm · approx. 3.00 ct in photographed design
Accent stones	6 round diamonds · 1.50 mm · approx. 0.09 ct total
Total diamond weight	Approx. 3.09 ct
Total stone count	7
Setting	East-West Bezel with Flush-Set Shoulder Accents
Center options	1, 1.5, 2, 2.5, 3, 3.5, 4 and 4.5 ct
Diamond quality	F color · VS1 clarity · Excellent cut, polish and symmetry
Finish	High Polish

Measurements describe the photographed configuration. Final diamond dimensions and total carat weight depend on the selected center.

About Lab Grown Diamonds

The oval cut combines a rounded outline with an elongated face. Setting it horizontally gives this ring a wider appearance across the finger. Six smaller round lab grown diamonds introduce separate points of light along the shoulders without changing the center's outline.

Metal, Care & Fit

Choose silver, platinum, or 9K, 14K or 18K gold in yellow, white or rose. The broad upper section provides a substantial signet profile, while the band narrows toward the underside.

Clean with warm water, mild soap and a soft brush. Pay attention to the openings at the oval's ends and around the six recessed shoulder stones. Follow our jewelry care guide for maintenance.

FAQ

Does the bezel completely surround the oval diamond?
No. The setting holds the oval along its two long edges, leaving the shorter ends open. The metal covers part of the diamond's perimeter without creating a complete frame.

Is the oval diamond set horizontally?
Yes. The 10.00 × 8.00 mm center sits east-west, with its longer axis running across the finger. This creates a wider face than a vertically positioned oval.

Will the shoulder diamonds catch on clothing?
The six round accents are recessed into the shoulders rather than raised in separate prong heads. Their placement keeps the diamond detail close to the polished metal surface.

How does this ring compare with a traditional signet?
The broad shoulders and tapered band follow a signet-style profile, but an oval diamond replaces the conventional flat signet face. Six small diamonds add detail to the shoulders.

How should I clean the partial bezel?
Use mild soapy water and a soft brush around both exposed ends of the oval and beneath the bezel edges. Clean the six recessed accents individually to remove residue from their surrounding metal.

Your cart is empty