Oval Cut Lab Grown Diamond Halo Engagement Ring (Scalloped Halo)

IGI Report IncludedMade to OrderInsured Delivery

Oval cut lab grown diamond halo engagement ring in yellow gold with pear side diamonds

1 of 13

$975.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1.08 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Oval Cut · Halo

Center

Oval Cut

Metal

Customizable

Setting

Halo

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	Details
Center diamond	Oval · 7.64 × 6.11 mm · approx. 1.08 ct
Halo diamonds	16 round diamonds · approx. 0.28 ct total
Side diamonds	2 pear diamonds · approx. 0.18 ct total
Total diamond weight	approx. 1.54 ct · 19 stones
Stone type	Lab Grown Diamond
Setting	Four-prong oval center with scalloped halo and pear side stones
Finish · Occasion	High Polish · Engagement, Anniversary, Bridal

Diamond details

Shape	Size	Qty	Weight (approx.)
Oval	7.64 × 6.11 mm	1	1.08 ct
Pear	3.89 × 2.50 mm	2	0.18 ct total
Round	2.20 × 2.20 mm	4	0.16 ct total
Round	1.40 × 1.40 mm	12	0.12 ct total
Total	—	19	1.54 ct

At a glance

An oval lab grown diamond halo engagement ring from Signora Jewels.

A 7.64 × 6.11 mm oval center of approx. 1.08 ct sits inside a 16-diamond round halo, with two pear side stones adding approx. 0.18 ct. Approx. 1.54 ct total.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Each metal color is shown in the photos. Choose your metal from the options on this page.

Signora Jewels sets the 7.64 × 6.11 mm oval inside a scalloped ring of sixteen round diamonds. Four prongs hold the center at its curved shoulders, while the halo follows the outline closely enough to make the face read wider without hiding the oval shape.

A pear diamond sits on each side with its point aimed toward the band. Those two stones bridge the halo and plain shank, so the design steps down cleanly instead of stopping at the center.

Design highlights

Oval center diamond of approx. 1.08 ct
Four-prong center setting with open curved ends
16 round halo diamonds totaling approx. 0.28 ct
2 pear side diamonds totaling approx. 0.18 ct
Raised gallery leaves access beneath the center
Approx. 1.54 ct total across 19 diamonds

The pear side stones are the detail that separates this ring from a standard halo. Their pointed ends lead the eye away from the center, while their rounded ends meet the halo without leaving a hard gap. Browse more halo engagement rings, compare layouts in the engagement ring guide, or review finishes in the metal guide.

About Lab Grown Diamonds

The oval center gives more visible length than a round diamond of similar weight. Its broad face catches larger flashes, while the smaller round halo diamonds break light into a tighter ring around the perimeter.

Metal, Care & Fit

White gold and platinum make the halo prongs recede against the diamonds. Yellow and rose gold leave a warmer outline beneath the pear sides and center basket. Clean under the raised gallery with warm water, mild soap and a soft brush, paying attention to the narrow spaces beside each pear point.

FAQ

How does the halo change the oval center?
The 16 round diamonds add width around the 7.64 × 6.11 mm oval. Their scalloped placement keeps the oval outline visible while making the center section read larger.

What do the pear side stones add to this design?
The two 3.89 × 2.50 mm pear diamonds taper the halo into the band. Their points face outward, creating a softer transition than a halo that ends directly against a plain shank.

Which metal makes the setting look brightest?
White gold and platinum blend most closely with the halo and center prongs. Yellow and rose gold create more contrast beneath the oval and pear diamonds.

How should I clean beneath the raised halo?
A soft brush reaches the pavilion through the open gallery. Brush gently beneath the center and around the pear tips, where lotion and soap residue collect first.

Your cart is empty