Oval Rose Cut Lab Grown Diamond Vintage Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 8

$516.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Oval Cut · Solitaire

Center

Oval Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Solitaire

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Center diamond	Oval Rose Cut · 8.10 × 6.28 × 3.27 mm · approx. 1.26 ct	1–4.5 ct
Accent diamonds	None · 0 stones · 0.00 ct	No accent diamonds
Total diamond weight	Approx. 1.26 ct · 1 stone	Varies with selected center
Stone type	Lab Grown Diamond	Lab Grown Diamond
Setting	Vintage Milgrain · decorative beaded perimeter with larger rounded securing points	Same design, scaled to center
Finish · Occasion	High Polish · Engagement, Anniversary	All metal options

At a glance

An oval rose-cut lab grown diamond vintage engagement ring from Signora Jewels.

One 1.26 ct oval rose-cut center, approximately 8.10 × 6.28 × 3.27 mm, framed by decorative metal beading and rounded securing points. No accent diamonds.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Choose your diamond weight and metal to have this ring made to order.

Signora Jewels places a row of polished gold beads around the edge of this oval rose-cut diamond. Larger rounded securing points interrupt the finer beading, creating a vintage-style border without adding a second row of diamonds.

The reference stone measures 8.10 × 6.28 mm across and 3.27 mm deep. Its broad triangular facets meet at the center, while the plain shoulders lead into a narrow 1.50 mm lower shank. The decorative head does the visual work; the band stays quiet.

Design highlights

1.26 ct oval rose-cut reference diamond
8.10 × 6.28 × 3.27 mm reference dimensions
Vintage Milgrain setting with decorative metal beading
Larger rounded securing points spaced around the oval
Plain polished shank, approximately 1.50 mm wide at the base
No halo, pavé or accent diamonds

The beaded edge is what separates this design from a conventional solitaire ring. Instead of a smooth bezel or four widely spaced claws, the metal follows the oval in a series of small rounded details, leaving the rose-cut face uncovered.

Diamond & Ring Details

Specification	Details
Reference center	Oval Rose Cut · 8.10 × 6.28 × 3.27 mm · approx. 1.26 ct
Center options	1, 1.26, 1.5, 2, 2.5, 3, 3.5, 4, 4.5 ct
Reference total weight / count	1.26 ct · 1 diamond
Accent diamonds	None · 0.00 ct
Setting	Vintage Milgrain with decorative beaded perimeter and rounded securing points
Finish	High Polish

Measurements refer to the estimated 1.26 ct reference design. Final proportions vary with the selected diamond weight.

About Lab Grown Diamonds

The oval rose cut has broad triangular facets that produce larger reflections than the smaller facets of a modern brilliant cut. Our diamond stone guide explains how facet patterns affect the appearance of a diamond.

Metal, Care & Fit

The small metal beads around the oval collect residue more readily than a smooth bezel. Clean them with mild soapy water and a soft brush, working gently between the larger securing points. See our jewelry care guide for routine maintenance.

FAQ

Are the small beads around the oval additional diamonds?
No. The decorative border consists of polished metal beads and larger rounded securing points. The ring contains one oval rose-cut diamond, with no halo or accent stones.

How does the Vintage Milgrain setting differ from a smooth bezel?
The perimeter has individual rounded metal details rather than one uninterrupted polished rim. Larger securing points sit among the smaller beads, leaving the broad rose-cut face visible.

Will the 1.26 ct reference diamond look the same at larger carat weights?
The oval rose cut and decorative beaded setting remain consistent, but the diamond's dimensions and the spacing of the metal details change with the selected center weight. The 8.10 × 6.28 × 3.27 mm measurements apply to the 1.26 ct reference.

Can this ring be stacked with a plain wedding band?
The lower shank is approximately 1.50 mm wide, while the decorative head extends beyond the shoulders. A straight companion band needs clearance around the raised setting, so check the finished ring for a flush fit.

How should I clean between the small metal beads?
Use warm water, mild soap and a soft brush to remove residue between the decorative beads and larger securing points. Rinse thoroughly and pat dry without catching cloth beneath the metal details.

Your cart is empty