A beautiful beginning
Your cart is empty
Begin with one of our most-loved collections and find a piece made for you.
Shop best sellers- Made to order in Surat
- Insured worldwide delivery
- Secure Shopify checkout
Pear Cut Lab Grown Diamond Cluster Engagement Ring
1 of 9
The Signora Promise
Hand-finished in SuratMade to order
Reports where statedExact scope shown
Insured deliverySigned & tracked
Secure checkoutShopify checkout
Standard-design returns30-day eligibility
Final inspectionChecked before dispatch
About This Ring
Pear Cut · Cluster
Center
Pear Cut
Carat
1 ct
CustomizableMetal
CustomizableSetting
Cluster
An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.
| Detail | In the photos | Customizable |
|---|---|---|
| Center diamond | Pear · 14.2 × 9.2 mm · approx. 5.00 ct | 1–5 ct |
| Accent diamonds | 14 diamonds · approx. 0.45 ct total | Scales with center |
| Total diamond weight | approx. 5.45 ct · 15 stones | Varies with center size |
| Stone type | Lab Grown Diamond | — |
| Setting | Four-Prong with clustered side stones | Scales with center |
| Band | Sculptural leaf-and-vine shoulders | — |
| Finish · Occasion | High Polish · Engagement, Anniversary, Bridal | — |
Diamond details
| Shape | Size | Qty | Weight (approx.) |
|---|---|---|---|
| Pear center | 14.2 × 9.2 mm | 1 | 5.00 ct |
| Pear accents | — | 2 | 0.30 ct total |
| Marquise accents | — | 4 | 0.10 ct total |
| Round accents | — | 8 | 0.05 ct total |
| Total | — | 15 | 5.45 ct |
At a glance
A pear lab grown diamond nature-inspired engagement ring from Signora Jewels.
The photographed design centers a 5.00 ct pear measuring approximately 14.2 × 9.2 mm, framed by 14 pear, marquise and round accent diamonds totaling approximately 0.45 ct. Approx. 5.45 ct total.
Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.
Each metal color is shown in the photos. Choose your center weight and metal from the options on this page.
Signora Jewels builds the composition outward from the 14.2 × 9.2 mm pear center. Two pear sides, four marquise leaves and eight small rounds sit among sculpted gold vines, so the shoulders read as branches rather than a straight row of stones.
The setting rises approximately 9.50 mm at the photographed 5.00 ct center. Leaf-shaped prongs grip the center while the shoulders spread to about 4.50 mm, then narrow to a 2.40 mm lower shank. The open spaces between the vines keep the metalwork visible instead of turning the sides into a continuous diamond band.
Design highlights
- 5.00 ct reference pear center measuring approximately 14.2 × 9.2 mm
- Two pear side diamonds totaling approximately 0.30 ct
- Four marquise leaf diamonds totaling approximately 0.10 ct
- Eight round accents totaling approximately 0.05 ct
- Sculptural leaf-and-vine shoulders with open spaces between the branches
- Approx. 4.50 mm shoulders tapering to a 2.40 mm lower shank
The side stones are part of the drawing rather than a separate halo. Pears extend the center outward, marquise cuts echo the metal leaves, and the small rounds punctuate the vine as it travels down the shoulders. Explore more engagement rings, compare shapes in the diamond stone guide, or review the available finishes in the metal guide.
Diamond & Ring Details
| Specification | Details |
|---|---|
| Center stone | Pear · 14.2 × 9.2 mm · approx. 5.00 ct in the photographed design |
| Accent stones | 2 pear + 4 marquise + 8 round · approx. 0.45 ct total |
| Total weight / count | approx. 5.45 ct · 15 stones in the photographed design |
| Setting | Four-Prong with clustered side stones |
| Band | Nature-inspired leaf-and-vine shoulders |
| Band details | Approx. 2.40 mm lower width · 1.95 mm lower thickness · 4.50 mm shoulder width |
| Setting height | Approx. 9.50 mm at the 5.00 ct reference weight |
| Center options | 1 ct, 1.5 ct, 2 ct, 2.5 ct, 3 ct, 3.5 ct, 4 ct, 4.5 ct, 5 ct |
| Finish | High Polish |
Measurements are approximate. The selected center weight determines the final diamond dimensions, setting proportions and total diamond weight.
About Lab Grown Diamonds
The pear center combines a rounded lower half with a pointed tip, giving the 5.00 ct reference stone a long 14.2 × 9.2 mm face-up outline. The pear and marquise accents repeat that tapered geometry along the shoulders, while the small rounds break up the pattern with compact points of light.
Metal, Care & Fit
The photographed construction uses approximately 7.40 g of 18K gold before the diamonds are set. Yellow and rose gold make the vines and leaf-shaped prongs easiest to distinguish; white gold and platinum keep the stones and metalwork closer in tone. Use warm water, mild soap and a soft brush around the open branches, where lotion can collect behind the accent settings.
FAQ
What do the side diamonds add to this pear engagement ring?
Fourteen accent diamonds add approximately 0.45 ct around the center. Two pear cuts extend the main stone outward, four marquise cuts form leaf-like points, and eight rounds fill smaller spaces along the vine shoulders.
How high does the 5 ct reference center sit?
The photographed setting is approximately 9.50 mm high. The raised center clears the sculptural side clusters while the shoulders rise beneath the basket for additional support.
Will the leaf-and-vine shoulders feel like a wide band?
The shoulders reach approximately 4.50 mm near the center but taper to about 2.40 mm at the bottom. Open spaces between the branches remove some of the visual and physical bulk of a solid 4.50 mm shank.
How should I clean the small diamonds between the leaves?
Use a soft brush with warm water and mild soap around the pear, marquise and round accents. Brush from both the top and underside of the open vine sections so residue does not remain behind the smaller stones.
Which metal gives the botanical details the most contrast?
Yellow and rose gold make the sculpted vines and leaf-shaped prongs stand apart clearly from the diamonds. White gold and platinum shift more attention toward the mixed-shape stones while retaining the same botanical structure.
Common questions
Ring questions, answered
Timing, shipping, certification and return eligibility for made-to-order rings.
Still deciding?
Talk to a Signora jeweler — free, and no obligation.
Book a consultation →
Answers last updated August 2, 2026
When will my order ship?
Standard listed pieces are made to order with an estimated dispatch of 7 business days. Use the product-page estimate when it is more specific and the timing confirmed after ordering. Delivery timing begins after dispatch and varies by destination and carrier service. Fully custom commissions follow the production schedule confirmed with their approved specifications or CAD.
When is insured worldwide delivery free?
Orders of US$500 or more receive free express, insured and tracked worldwide delivery. Below US$500, express, insured and tracked worldwide delivery is charged at the fixed rate shown at checkout.
Will I have to pay import duties?
For every destination available at checkout, Signora prepays applicable import duties and import taxes. Customers should not be asked to pay those import charges again on delivery.
What certificate comes with my jewelry?
Every finished piece includes a Signora Jewelry Certificate. Each selected individual lab-grown center or primary diamond of 0.50 ct or above includes an IGI grading report. Below 0.50 ct, IGI can be arranged by custom request. Custom moissanite and gemstone selections include GRA documentation, with the exact scope confirmed in the approved specifications. The product page or approved specifications state the exact laboratory, report type and scope.
Can I return a made-to-order listed design?
Standard listed products are eligible for return within 30 days after carrier-recorded delivery when unworn, unused and in their original condition, with the original packaging and included documents. Normal listed choices such as metal, stone carat, chain or bracelet length, an extended ring size, or complimentary engraving do not by themselves make an item Final Sale. A sale or discount also does not imply Final Sale; only an item explicitly classified as Final Sale follows the non-returnable exclusion.
How are fully custom orders handled?
A fully custom commission is different from a listed made-to-order design. After its specifications or CAD are approved, a normal change-of-mind return does not apply. Manufacturing defects remain reviewable. Signora may accept an exceptional non-defect return case by case; documented labor and genuinely non-recoverable costs may be deducted, but these deductions are not a restocking fee.