Pear Cut Lab Grown Diamond Side Stone Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 8

$825.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut ·

Center

Pear Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Center diamond	Pear Cut · 10.50 × 6.49 mm · approx. 1.50 ct	1–4.5 ct
Accent diamonds	2 marquise + 4 round diamonds · approx. 0.10 ct total	Scales with center
Total diamond weight	approx. 1.60 ct	Varies with center size
Stone type	Lab Grown Diamond	—
Setting	Prong-set pear center with open gallery and nature-inspired side stones	—
Finish · Occasion	High Polish · Engagement, Anniversary	—

Diamond details

Shape	Size	Qty	Weight (approx.)
Pear Cut	10.50 × 6.49 mm	1	1.50 ct
Marquise	—	2	0.06 ct total
Round Cut	—	4	0.04 ct total
Total	—	7	1.60 ct

At a glance

A pear lab grown diamond side stone engagement ring from Signora Jewels.

A 1.50 ct, 10.50 × 6.49 mm pear center sits in an elevated prong setting, with 2 marquise and 4 round accents totaling approx. 0.10 ct. Approx. 1.60 ct total.

Made to order in 11 metals: silver, 10K/14K/18K gold (yellow, white, rose) and platinum.

Each metal color is shown in the photos. Choose your center size and metal in the options on this page.

Signora Jewels sets the 10.50 × 6.49 mm pear vertically, with the pointed tip held at the top and the rounded end secured below. An open gallery lifts the center above the shoulders, while two marquise and four round diamonds are worked into the sculpted vine-and-leaf metalwork instead of forming a conventional halo.

The setting rises about 6.5–7.0 mm, giving the pear enough clearance for its full outline to stay visible. The lower shank is approximately 1.80 mm wide and 1.60 mm thick, then opens into organic shoulders measuring roughly 5.0–6.0 mm near the center.

Design highlights

1.50 ct pear center, approx. 10.50 × 6.49 mm in the photos
Center customizable from 1 ct to 4.5 ct
2 marquise side diamonds totaling approx. 0.06 ct
4 round accents totaling approx. 0.04 ct
Open elevated gallery beneath the center
Sculpted vine-and-leaf shoulders with polished lower shank

The side stones follow the metalwork instead of sitting in a straight row. The marquise diamonds read like leaves beside the pear, while the smaller rounds punctuate the open curves around them. That keeps the 1.50 ct center dominant while still giving the shoulders detail from several angles.

Diamond & Ring Details

Specification	Details
Center stone	Pear Cut · 10.50 × 6.49 mm · approx. 1.50 ct in the photos
Side diamonds	2 marquise · approx. 0.06 ct total
Round accents	4 round diamonds · approx. 0.04 ct total
Total diamond weight	approx. 1.60 ct in the photographed configuration
Setting	Prong-set pear center with open gallery and nature-inspired side stones
Center options	1, 1.5, 2, 2.5, 3, 3.5, 4 and 4.5 ct
Finish	High Polish

Measurements are approximate; your chosen center size sets the final diamond weight.

About Lab Grown Diamonds

A pear cut combines a rounded lower half with a single pointed tip, so orientation and prong placement matter. In this design, the 10.50 mm length draws the eye along the finger while the open setting leaves the outline easy to read. See the diamond stone guide for more on cut and proportions.

Metal, Care & Fit

White gold and platinum keep the prongs visually close to the diamonds, while yellow and rose gold make the vine structure more obvious around the marquise leaves. Compare the choices in the metal guide. Clean beneath the elevated center and between the open shoulder sections with warm water, mild soap and a soft brush. More detailed care is in the jewelry care guide.

FAQ

How is the pointed end of the pear protected?
The pear is secured in a prong setting with support at the pointed end. That keeps the tip held while leaving the elongated outline visible from above.

What do the marquise diamonds do in this design?
Two marquise diamonds sit within the vine-style shoulders and read visually like leaves. Together they account for approx. 0.06 ct of the side-diamond weight.

How much extra diamond weight is in the shoulders?
The six side diamonds total approximately 0.10 ct. Two are marquise at approx. 0.06 ct total, and four are round accents at approx. 0.04 ct total.

Will a straight wedding band sit completely flush?
The elevated center and sculpted side structure can leave a small space beside a straight band. A contoured band follows the organic shoulder profile more closely.

Which metal makes the leaf pattern most visible?
Yellow and rose gold create stronger contrast around the marquise and round diamonds. White gold and platinum make the setting read more continuously with the stones.

Your cart is empty