Pear Cut Lab Grown Diamond Solitaire Engagement Ring

Signora Jewelry Certificate IncludedMade to OrderInsured Delivery

1 of 8

$293.00

Price updates with your selections

Product documentation Signora Jewelry Certificate Included A Signora Jewelry Certificate lists the finished-piece and material details supplied for this design. Finished-piece and material details · Signora Jewelry Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Solitaire

Center

Pear Cut

Metal

Customizable

Setting

Solitaire

Detail	Details
Center diamond	Pear Cut · approx. 5.0 × 3.3 mm · approx. 0.25 ct
Accent diamonds	None · 0 stones · 0.00 ct
Total diamond weight	Approx. 0.25 ct · 1 stone
Stone type	Lab Grown Diamond
Diamond quality	F color · VS1 clarity
Setting	Solitaire with three rounded prongs: one over the pear point and two at the rounded end
Band	Plain polished shank · estimated 1.45 mm wide and 1.40 mm thick at the base
Setting height	Estimated 4.5–5.0 mm
Finish · Occasion	High Polish · Engagement

At a glance

A pear-cut lab grown diamond solitaire engagement ring from Signora Jewels.

One pear-cut center, approx. 0.25 ct and 5.0 × 3.3 mm, held by three rounded prongs. No accent diamonds: 0 stones, 0.00 ct.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Made to order in your chosen metal with a fixed, approximately 0.25 ct pear center.

Signora Jewels sets this engagement ring with one approximately 0.25 ct pear and three rounded prongs. One caps the point; two hold the rounded end.

The approximately 5.0 × 3.3 mm center sits on a plain polished shank, estimated at 1.45 mm wide at the base.

Design highlights

One pear-cut center, approximately 0.25 ct and 5.0 × 3.3 mm
Three rounded prongs, including one directly over the pear point
Long sections of the pear’s sides visible between the prongs
Plain polished lower shank, estimated at 1.45 mm wide and 1.40 mm thick
No halo, side diamonds or diamond-set shoulders
11 metal options with a fixed center weight

The metal meets the stone at three small contact points rather than tracing a border. That leaves the pear’s narrowing sides visible between the tips.

About Lab Grown Diamonds

The single pear-cut lab grown diamond supplies the full approximately 0.25 ct total, with no halo or shoulder diamonds.

Metal, Care & Fit

Yellow and rose gold emphasize the rounded tips; white metals reduce the contrast. Follow the care guidance when brushing gently around the point.

FAQ

What covers the point of the 5.0 × 3.3 mm pear?
A rounded metal prong sits over the pear’s point, while two more prongs hold the wider end. The long sides are not enclosed by metal, so keep those exposed edges clear of hard knocks.

Does the 0.25 ct total include diamonds along the slim band?
The approximately 0.25 ct total comes entirely from one pear-cut center. The lower shank, estimated at 1.45 mm wide, is plain, with no halo or shoulder diamonds adding to the stone count.

Which metal draws more attention to this pear’s three rounded prongs?
Yellow and rose gold create warmer contrast at the three rounded tips, while white gold, silver and platinum give them a white-metal appearance. Without a halo around the pear, each prong remains a separate point of metal against the diamond.

How should I clean around the rounded prong at the pear’s point?
The three rounded prongs meet the pear at its point and along the lower curve. Use warm water, mild soap and a soft brush around each contact point, then rinse and pat dry without dragging a cloth across the tip.

Your cart is empty