Pear Cut Lab Grown Diamond Two-Stone Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 9

$496.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

For ChristmasOrder by Monday 30 November for delivery before 25 December. Holiday gift guide

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Pavé

Center

Pear Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Pavé

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Pear center diamond	Pear Cut · 11.50 × 6.97 × 4.17 mm · approx. 2.00 ct	Scales proportionally
Round center diamond	Round Brilliant · 7.00 mm diameter · approx. 1.25 ct	Scales proportionally
Center diamond weight	3.25 ct combined	Combined carat selection · 8:5 ratio
Shoulder diamonds	12 Round Brilliant · approx. 0.25 ct total	Reference accent weight
Total diamond weight	Approx. 3.50 ct · 14 diamonds	Varies with center selection
Stone type	Lab Grown Diamond	F color · VS1 clarity
Setting	Two-Stone with raised individual open baskets, protective pear-tip support and prong-set round center	Center sizes scale together
Finish · Occasion	High Polish · Engagement, Anniversary, Bridal	11 metal choices

Diamond details

Shape	Size	Qty	Weight (approx.)
Pear Cut	11.50 × 6.97 × 4.17 mm	1	2.00 ct
Round Brilliant · Center	7.00 mm diameter	1	1.25 ct
Round Brilliant · Shoulders	Approx. 0.018–0.021 ct per stone	12	0.25 ct
Total	—	14	3.50 ct

At a glance

A pear cut lab grown diamond Two-Stone engagement ring from Signora Jewels.

One 2.00 ct pear measuring 11.50 × 6.97 × 4.17 mm and one 1.25 ct round measuring 7.00 mm, held in separate raised baskets. Twelve pavé shoulder diamonds add 0.25 ct for 3.50 ct total.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Choose your combined center diamond weight and metal from the options on this page. Both center stones scale together, keeping their 8:5 carat ratio.

Two diamonds, neither directly in front of the other. Signora Jewels sets an 11.50 mm pear beside a 7.00 mm round brilliant, turning the pear's point toward the neighboring stone. The pear weighs 2.00 ct and the round 1.25 ct in the reference design. Their different outlines give this Toi et Moi ring its unmistakable off-center look.

Each center diamond rests in its own raised open basket. The pear has protective support at its pointed end, while separate prongs secure the round. Twelve small round diamonds follow the shoulders, adding 0.25 ct without filling the space between the two heads.

Design highlights

Pear Cut center · 2.00 ct reference weight
Round Brilliant center · 1.25 ct reference weight
Asymmetrical Two-Stone setting with separate open baskets
Protective tip support on the pear and multi-prong round setting
12 pavé-set shoulder diamonds · 0.25 ct total
Proportional center customization with an 8:5 weight ratio

The 2.00 mm lower shank supports two heads that rise approximately 7.5–8.2 mm above the finger. It's a noticeable setting, especially in profile. The shoulder pavé stops short of the center baskets, leaving a clean break between the small accents and the larger stones. Explore our engagement rings or browse other diamond rings.

Diamond & Ring Details

Specification	Details
Design	Toi et Moi · Two-Stone
Pear diamond	11.50 × 6.97 × 4.17 mm · 2.00 ct
Round diamond	7.00 mm diameter · 1.25 ct
Center diamond ratio	Pear : Round = 8 : 5 by carat weight
Accent diamonds	12 Round Brilliant · 0.25 ct total
Combined reference weight	3.50 ct · 14 diamonds
Center setting	Individual raised open baskets with prong support
Shoulders	Round-diamond pavé
Bottom band width	Approx. 2.00 mm
Shoulder width	Approx. 2.10–2.30 mm
Setting height	Approx. 7.5–8.2 mm
Finish	High Polish

Measurements are approximate. Both center diamonds scale proportionally with the selected combined center weight. Finished proportions and metal weight depend on the chosen configuration.

About Lab Grown Diamonds

The pear center narrows to a single point, while the round brilliant carries a circular outline and a symmetrical facet pattern. Together they create two different patterns of reflected light in one setting. The lab grown diamonds are selected to F color and VS1 clarity specifications. Learn more in our diamond and stone guide.

Metal, Care & Fit

Choose silver, 9K, 14K or 18K gold in yellow, white or rose, or platinum. The two raised baskets stand above the pavé shoulders, so take care when putting on gloves or fitted sleeves. Clean around both heads and the twelve smaller diamonds using warm water, mild soap and a soft brush. Avoid pressure on the pear tip and remove the ring during heavy work.

FAQ

Can I change the size of both center diamonds?
Yes. Both center diamonds scale together using a combined carat selection. The pear-to-round weight ratio remains 8:5, based on the 2.00 ct pear and 1.25 ct round reference.

Why are the two center diamonds set at different angles?
The pear and round sit asymmetrically beside each other, with the pear's pointed end turned inward. Their independent baskets allow the two shapes to form a shared focal point without a connecting frame.

Is the pointed end of the pear protected?
Yes. The pear basket includes protective tip support, with additional prongs holding the stone along its sides. Take care to avoid impacts directly against the pointed end.

Are the smaller diamonds part of the two center settings?
No. All twelve smaller round brilliant diamonds are pavé-set along the shoulders. They weigh approximately 0.25 ct combined in the reference design.

Can a wedding band sit directly against this ring?
The asymmetrical raised baskets can leave an uneven gap beside a straight wedding band. A contoured band can follow the two-stone profile more closely, depending on its shape and height.

Your cart is empty