Pear Cut Lab Grown Diamond Vintage Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 8

$597.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 0.7 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

For ChristmasOrder by Monday 30 November for delivery before 25 December. Holiday gift guide

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Vintage

Center

Pear Cut

Metal

Customizable

Setting

Vintage

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	Details
Center diamond	Pear Cut · approx. 7.6 × 5.0 mm · 0.70 ct
Accent diamonds	22 Round Brilliant · approx. 0.31 ct total
Total diamond weight	Approx. 1.01 ct · 23 diamonds
Stone type	Lab Grown Diamond
Setting	Vintage Milgrain with protective V-prong and side claws
Shoulders	Leaf-inspired openwork with round diamond accents
Gallery	Raised open gallery · no halo
Finish · Occasion	High Polish · Engagement, Bridal

Diamond details

Shape	Size	Qty	Weight (approx.)
Pear Cut center	7.6 × 5.0 mm	1	0.70 ct
Round Brilliant accents	Individual dimensions not specified	22	0.31 ct total
Total	Reference configuration	23	1.01 ct

At a glance

A pear-cut lab grown diamond vintage engagement ring from Signora Jewels.

The 0.70 ct pear center measures approximately 7.6 × 5.0 mm, with a protective V-prong and 22 round brilliant shoulder diamonds totaling 0.31 ct. Approximately 1.01 ct overall.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Made to order with a fixed 0.70 ct pear center. Choose your metal and color.

At Signora Jewels, we set the 7.6 × 5.0 mm pear between shoulders shaped like a chain of small leaves. The center's pointed tip sits beneath a metal V, while two claws secure its rounded end. The engagement ring has no halo around the pear.

The shoulder accents total approximately 0.31 ct across 22 round brilliant diamonds. Open spaces separate the leaf-shaped sections, and tiny beaded edges outline the diamonds. The lower shank narrows to approximately 1.70 mm.

Design highlights

Fixed 0.70 ct pear center measuring approximately 7.6 × 5.0 mm
Protective V-prong at the pointed tip, with side claws
22 round brilliant accent diamonds totaling approximately 0.31 ct
Leaf-inspired diamond settings with beaded metal borders
Openwork shoulders measuring approximately 3.0–3.6 mm across the motifs
Raised open gallery and plain lower shank, with no halo

The round accents sit within individual leaf-shaped outlines, not a straight pavé row. Look along the band and the spaces between those leaves let the polished metal show through.

About Lab Grown Diamonds

The pear center combines a rounded end with a pointed tip, while the round brilliant accents sit inside the curved shoulder motifs. The 23 diamonds total approximately 1.01 ct in the reference configuration.

Metal, Care & Fit

Choose silver, yellow gold, white gold, rose gold or platinum. Compare the metal options for the beaded leaf outlines and polished lower band. The reference setting stands approximately 5.5–6.0 mm high.

For cleaning and care, use warm water, mild soap and a soft brush. Work gently around the V-prong, between the open leaf motifs and along the small beaded edges. Rinse thoroughly and dry with a lint-free cloth.

FAQ

How is the pointed tip of the pear diamond protected?
A V-prong covers the pointed tip of the 0.70 ct pear center. Two side claws near its rounded end keep the stone secure while leaving its tapered outline visible.

What makes the shoulder design different from a straight pavé band?
The 22 round brilliant accents sit in alternating leaf-inspired settings rather than one continuous straight row. Open spaces separate the decorative sections, and small beaded metal borders outline the diamonds.

Can this vintage engagement ring be stacked with a wedding band?
The decorative shoulders measure approximately 3.0–3.6 mm across their leaf motifs and narrow to a 1.70 mm lower shank. A flush fit depends on the finished gallery clearance and the wedding band's profile; a contoured band can follow the openwork shoulders more closely.

How do I clean the beaded borders and leaf-shaped settings?
Use warm water, mild soap and a soft brush around the 22 small accent diamonds. Clean gently between the leaf-shaped metal outlines without forcing bristles beneath the prongs, then rinse and dry thoroughly.

Your cart is empty