Pear Cut Lab Grown Diamond Halo Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 9

$579.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 0.6 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Halo

Center

Pear Cut

Metal

Customizable

Setting

Halo

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	Details
Center diamond	Pear Cut · 7.42 × 4.50 × 3.03 mm · approx. 0.60 ct
Halo diamonds	Approx. 20–22 Round Brilliant · 0.18 ct total
Shoulder diamonds	Approx. 14–18 Round Brilliant · 0.13 ct total
Total diamond weight	Approx. 0.91 ct · 35–41 diamonds
Stone type	Lab Grown Diamond
Diamond quality	F Color · VS1 Clarity
Setting	Halo with rounded center prongs, single pear-shaped pavé border and pavé-set shoulders
Band	Polished shank · approx. 1.80 mm wide and 1.80 mm thick at base
Setting height	Approx. 5.8–6.3 mm
Finish · Occasion	High Polish · Engagement

Diamond details

Shape	Size	Qty	Weight (approx.)
Pear Cut center	7.42 × 4.50 × 3.03 mm	1	0.60 ct
Round Brilliant halo	Individual diameters not specified	Approx. 20–22	0.18 ct total
Round Brilliant shoulders	Individual diameters not specified	Approx. 14–18	0.13 ct total
Total	—	Approx. 35–41	0.91 ct

At a glance

A pear-cut lab grown diamond halo engagement ring from Signora Jewels.

One 0.60 ct pear center, 7.42 × 4.50 × 3.03 mm, framed by a single pavé halo. Approximately 34–40 round accent diamonds total 0.31 ct. Approx. 0.91 ct overall.

Made to order in 10K, 14K and 18K gold, available in yellow, white and rose gold.

Made to order in your selected gold color and purity, with a fixed 0.60 ct pear-cut center.

Signora Jewels places a 7.42 × 4.50 mm pear inside a close-fitting row of round diamonds. Polished prongs hold the center while the halo follows its pointed top and rounded lower edge.

Approximately 20–22 diamonds form the halo, contributing 0.18 ct. Another 14–18 rounds continue along the shoulders, adding 0.13 ct without a second halo row.

Design highlights

0.60 ct pear-cut center measuring 7.42 × 4.50 × 3.03 mm
Single Halo with approximately 20–22 round brilliant diamonds
0.18 ct total halo diamond weight
Approximately 14–18 shoulder diamonds totaling 0.13 ct
Slim pavé-set shoulders measuring approximately 1.90–2.05 mm
Approximately 0.91 ct total diamond weight

The halo adds a narrow border around the pear without covering its elongated center. Small round diamonds carry that border into the shoulders, where the setting tapers toward the 1.80 mm lower shank.

About Lab Grown Diamonds

The pear center combines a pointed top with a rounded lower end. The smaller round diamonds create closely spaced reflections around its outline. Explore our diamond stone guide for more about different diamond cuts.

Metal, Care & Fit

Choose yellow, white or rose gold in 10K, 14K or 18K purity. The raised halo sits above the pavé-set shoulders, so a companion band needs clearance beside the center. Browse our halo engagement rings and follow the jewelry care guide for cleaning the small diamond settings.

FAQ

How does the single halo follow the pear-cut center?
Approximately 20–22 small round diamonds follow the pear's pointed top and rounded lower edge. They add 0.18 ct around the center without creating a second surrounding row.

How much diamond weight comes from the halo and shoulders?
The halo contributes approximately 0.18 ct and the shoulders add 0.13 ct. Together, the accents weigh 0.31 ct, bringing the complete ring to approximately 0.91 ct.

Which gold color works with the pear-shaped halo?
White gold gives the round accents a consistent white-metal frame. Yellow and rose gold create a warmer contrast around the colorless diamonds and make the individual metal prongs more noticeable.

Can this pear halo ring sit beside a straight wedding band?
The setting height is approximately 5.8–6.3 mm, with shoulders measuring approximately 1.90–2.05 mm wide. These dimensions do not guarantee a flush fit, so compare the finished ring with the intended wedding band.

How should I clean the pear halo and pavé shoulders?
Use warm water, mild soap and a soft brush around the halo's pointed end, curved lower section and small shoulder diamonds. Rinse thoroughly and pat dry without pulling fabric through the prongs.

Your cart is empty