Pear Lab Grown Diamond Bubble Halo Engagement Ring with Marquise Accents

IGI Report IncludedMade to OrderInsured Delivery

Pear cut lab grown diamond halo engagement ring in white gold with pavé halo and floating marquise side diamonds

1 of 8

$839.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1.05 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Halo

Center

Pear Cut

Metal

Customizable

Setting

Halo

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	Specifications
Center diamond	Pear Cut · 8.65 × 5.76 × 3.64 mm · 1.05 ct
Center quality	E Color · VS Clarity
Halo diamonds	Approx. 22–26 Round Brilliant · 0.13 ct total
Shoulder diamonds	Approx. 4 Marquise + 6–8 Round Brilliant · 0.36 ct total
Accent quality	EF Color · VS Clarity
Total diamond weight	Approx. 1.54 ct · approx. 33–39 stones
Stone type	Lab Grown Diamond
Setting	Halo with claw-prong pear center and floating marquise-and-round shoulders
Band	Polished shank with open-link diamond shoulders · 1.70 mm wide and 1.80 mm high at base
Finish · Occasion	High Polish · Engagement

Diamond details

Diamond	Measurement	Quantity	Weight
Pear Cut center	8.65 × 5.76 × 3.64 mm	1	1.05 ct
Marquise shoulder diamonds	4.00 × 2.00 mm	Approx. 4	Included in 0.36 ct shoulder total
Round shoulder diamonds	Approx. 2.10 mm	Approx. 6–8	Included in 0.36 ct shoulder total
Round halo diamonds	Approx. 1.00 mm	Approx. 22–26	0.13 ct total
All accents	Mixed sizes	Approx. 32–38	0.49 ct total
Grand total	—	Approx. 33–39	1.54 ct

At a glance

A pear-cut lab grown diamond halo engagement ring from Signora Jewels.

One 1.05 ct pear center measuring 8.65 × 5.76 × 3.64 mm, with marquise and round accent diamonds totaling 0.49 ct. Approx. 1.54 ct total diamond weight.

Made to order in 10K, 14K and 18K gold, available in yellow, white and rose gold.

Four marquise side diamonds, round bubble accents, a pavé halo and a polished lower shank with a 1.70 mm reference width.

Signora Jewels sets the 1.05 ct pear-cut diamond inside a close border of small round diamonds, then breaks the shoulders into an open arrangement of marquise and round stones. The marquise diamonds sit lengthwise along the band, while the rounds fill the spaces between them.

The pear center measures 8.65 × 5.76 mm and is held by polished prongs, including a protective point support. Approximately 22–26 round diamonds form the halo, with another 4 marquise and 6–8 rounds along the shoulders.

Design highlights

1.05 ct pear-cut center · 8.65 × 5.76 × 3.64 mm
Single pavé halo of approximately 22–26 round diamonds · 0.13 ct
Approximately 4 marquise and 6–8 round shoulder diamonds · 0.36 ct
Floating bubble-style shoulder arrangement with visible polished metal links
Protective pear-point prong and raised center setting
Approximately 1.54 ct total diamond weight

The halo gives the pear a defined outline without adding a second row. Along the shoulders, the marquise stones create longer flashes than the small rounds, and the open links keep each diamond visibly separate.

Explore our halo engagement rings, compare pear and marquise facets in the diamond stone guide, and follow our jewelry care guide for cleaning the open-link settings.

FAQ

What makes the shoulders different from a regular pavé band?
The shoulders combine approximately four marquise diamonds with six to eight round diamonds in an open bubble-style arrangement. Polished metal spaces separate the stones rather than forming a continuous row of pavé.

How much diamond weight is outside the pear center?
The halo and shoulders contain approximately 0.49 ct of accent diamonds. The halo contributes 0.13 ct and the marquise-and-round shoulders contribute 0.36 ct, bringing the complete ring to approximately 1.54 ct.

How is the pointed end of the pear protected?
A polished prong supports the pear's pointed tip, while additional side prongs hold the curved edges. The halo surrounds the center but does not replace its individual securing points.

Can a straight wedding band sit flush beside the floating shoulders?
The marquise-set shoulder section spans approximately 3.5–4.2 mm, and the center setting rises approximately 6.5–7.0 mm. These reference dimensions do not guarantee a flush fit, so compare the finished ring with the intended wedding band.

How should I clean between the floating marquise and round diamonds?
Use warm water, mild soap and a soft brush around the shared prongs and open metal links. Rinse thoroughly and pat dry without pulling fabric through the spaces between the stones.

Your cart is empty