Deco Pear Cut Lab Grown Diamond Three-Stone Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 9

$832.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1.0 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

For ChristmasOrder by Monday 30 November for delivery before 25 December. Holiday gift guide

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Three Stone

Center

Pear Cut

Metal

Customizable

Setting

Three Stone

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	Details
Center diamond	Pear Cut · 9.18 × 5.60 mm · approx. 1.00 ct
Side diamonds	2 kite-cut diamonds · approx. 0.27 ct total
Total diamond weight	approx. 1.27 ct · 3 diamonds
Stone type	Lab Grown Diamond
Setting	Three-Stone with kite-cut side diamonds
Finish · Occasion	High Polish · Engagement

Diamond details

Shape	Size	Qty	Weight (approx.)
Pear Cut	9.18 × 5.60 mm	1	1.00 ct
Kite Cut	Not specified	2	0.27 ct total
Total	—	3	1.27 ct

At a glance

A pear lab grown diamond three-stone engagement ring from Signora Jewels.

A 1.00 ct, 9.18 × 5.60 mm pear center is flanked by 2 kite-cut diamonds totaling approx. 0.27 ct. Approx. 1.27 ct total.

Made to order in 11 metals: silver, 10K/14K/18K gold (yellow, white, rose) and platinum.

Choose your metal in the options on this page.

Signora Jewels pairs the 9.18 × 5.60 mm pear with two sharply tapered kite diamonds, creating a three-stone ring that moves from a rounded center into crisp geometric shoulders. The side stones point directly toward the pear, so the three diamonds read as one continuous composition rather than separate accents.

The setting sits approximately 5.5–6.0 mm high. At the base, the shank measures about 2.00 mm wide and 1.50 mm thick, keeping the lower band restrained beneath the wider three-stone top.

Design highlights

1.00 ct pear center, approx. 9.18 × 5.60 mm
2 kite-cut side diamonds totaling approx. 0.27 ct
Classic Three-Stone arrangement
Geometric tapered side settings
Slim polished lower shank
Approx. 1.27 ct total diamond weight

The kite diamonds are the defining detail. Their angled edges narrow toward the band and widen toward the pear, pulling the eye into the center without adding pavé or another rounded shape.

About Lab Grown Diamonds

The pear center combines one pointed end with a rounded lower half, while the kite side stones bring straight geometric facets beside it. Read more about shape and proportion in the diamond stone guide.

Metal, Care & Fit

White gold and platinum keep the three settings visually close to the diamonds; yellow and rose gold create more contrast around the kite-shaped sides. Compare choices in the metal guide. Clean beneath the center and around both tapered side settings with warm water, mild soap and a soft brush.

FAQ

What makes the side diamonds unusual on this ring?
The two side diamonds are kite cut rather than round or pear shaped. Their pointed geometry creates a sharp transition from the 9.18 × 5.60 mm pear center into the band.

How much diamond weight is in the two kite side stones?
The two kite-cut diamonds total approximately 0.27 ct. Together with the 1.00 ct pear center, the ring carries approximately 1.27 ct total diamond weight.

How does this Three-Stone design sit on the finger?
The setting height is approximately 5.5–6.0 mm. The tapered side settings spread the top of the ring while the lower shank stays approximately 2.00 mm wide.

Will this ring work beside a wedding band?
The three-stone setting occupies space beside the center, so a straight band can leave a slight gap. A contoured band follows the pear-and-kite profile more closely.

How should the kite side stones be cleaned?
Use a soft brush around the narrow inner and outer points of both side settings. Those junctions collect more residue than the plain polished lower shank.

Your cart is empty