Pear Cut Lab Grown Diamond Three-Stone Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 8

$898.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

For ChristmasOrder by Monday 30 November for delivery before 25 December. Holiday gift guide

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Three Stone

Center

Pear Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Three Stone

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Center diamond	Pear Cut · 9.77 × 6.62 mm · approx. 1.50 ct	1–4.5 ct
Side diamonds	2 pear side diamonds with round accents · approx. 0.51 ct total	Three-Stone layout
Total diamond weight	approx. 2.01 ct	Varies with selected center
Stone type	Lab Grown Diamond	—
Setting	Three-Stone with pear side stones and open gallery	—
Finish · Occasion	High Polish · Engagement, Anniversary	—

Diamond details

Shape	Role	Qty	Weight (approx.)
Pear Cut	Center · 9.77 × 6.62 mm	1	1.50 ct
Pear Cut	Flanking side stones	2	Included in 0.51 ct accent total
Round Cut	Decorative shoulder accents	Not specified	Included in 0.51 ct accent total
Total accents	Pear + round diamonds	—	0.51 ct
Total diamond weight	Center + accents	—	2.01 ct

At a glance

A pear lab grown diamond three-stone engagement ring from Signora Jewels.

A 1.50 ct, 9.77 × 6.62 mm pear center is framed by two pear side stones and round accents totaling approx. 0.51 ct. Approx. 2.01 ct total.

Made to order in 11 metals: silver, 10K/14K/18K gold (yellow, white, rose) and platinum.

Choose your center weight and metal for this made-to-order ring.

Signora Jewels sets the 9.77 × 6.62 mm pear between two smaller pear side diamonds, then carries round accents outward through the decorative shoulders. The repeated pear outlines keep the three-stone ring focused on pointed shapes rather than mixing a broad center with unrelated side stones.

The center rises approximately 6.5–7.0 mm above an open gallery. At the base, the shank measures about 1.70 mm wide and 1.70 mm thick, while the decorated shoulders spread to roughly 5.0–6.0 mm near the center.

Design highlights

1.50 ct pear center in the reference design
Center measures approx. 9.77 × 6.62 mm
Two pear-shaped flanking side diamonds
Pear and round accent diamonds totaling approx. 0.51 ct
Three-Stone setting with elevated open gallery
Approx. 2.01 ct total diamond weight

The smaller pears widen the ring exactly where the center reaches its broadest point. Round accents then break up the shoulder line with tighter flashes, so the 1.50 ct pear remains the dominant outline from tip to rounded end.

Diamond & Ring Details

Specification	Details
Center stone	Pear Cut · 9.77 × 6.62 mm · approx. 1.50 ct in the photos
Side stones	2 pear-shaped diamonds with round shoulder accents
Accent diamond weight	approx. 0.51 ct total
Total diamond weight	approx. 2.01 ct in the photographed configuration
Setting	Three-Stone with pear side stones and open gallery
Center options	1, 1.5, 2, 2.5, 3, 3.5, 4 and 4.5 ct
Finish	High Polish

Measurements are approximate; your selected center weight sets the final diamond dimensions and total weight.

About Lab Grown Diamonds

The pear center combines a rounded lower half with a pointed tip, while the smaller pear side stones repeat that same outline at a reduced scale. Read more about pear proportions and shape in the diamond stone guide.

Metal, Care & Fit

White gold and platinum keep the settings visually close to the diamonds, while yellow and rose gold create more contrast around the decorative shoulders. Compare choices in the metal guide. Clean beneath the raised gallery and around the side stones with warm water, mild soap and a soft brush.

FAQ

What makes this a three-stone design?
The 1.50 ct reference pear is flanked by one smaller pear diamond on each side. The remaining round accents sit farther into the shoulders rather than replacing the two principal side stones.

How much diamond weight is in the side setting?
The pear and round accent diamonds total approximately 0.51 ct. Combined with the 1.50 ct reference center, the photographed configuration totals approximately 2.01 ct.

How is the pointed pear center protected?
The center uses a prong setting with support at the pointed end and around the rounded portion. This keeps the 9.77 × 6.62 mm reference outline visible while securing its exposed tip.

How high does the center sit?
The setting rises approximately 6.5–7.0 mm. The open gallery leaves space underneath the pear and separates it from the side-stone shoulders.

Will this ring sit completely flush with a straight wedding band?
The three-stone structure and elevated gallery can leave a small gap beside a straight band. A contoured band follows the center and side-stone profile more closely.

Your cart is empty