Princess Cut Lab Grown Diamond Solitaire Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

Princess cut lab grown diamond engagement ring with 2.00 ct square center, sculpted leaf-shaped gold prongs, floral basket and plain polished yellow gold shank.

1 of 8

$518.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

For ChristmasOrder by Monday 30 November for delivery before 25 December. Holiday gift guide

Made in 7 days 30-day returnsDuties prepaid

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Princess Cut · Solitaire

Center

Princess Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Solitaire

Detail	In the photos	Customizable
Center diamond	Princess Cut · 7.0 × 7.0 mm · approx. 2.00 ct	1–4.5 ct
Accent diamonds	None · 0.00 ct	No accent stones
Total diamond weight	Approx. 2.00 ct · 1 diamond	Varies with center selection
Stone type	Lab Grown Diamond	F color · VS1 clarity
Setting	Four-Prong raised princess basket with sculpted leaf and petal detailing	Center size selectable
Shoulders	Plain polished shank · approx. 1.70 mm bottom width	High Polish
Finish · Occasion	High Polish · Engagement, Anniversary, Bridal	11 metal choices

At a glance

A princess cut lab grown diamond solitaire engagement ring with floral prong detailing from Signora Jewels.

A 7.0 × 7.0 mm princess center weighing approx. 2.00 ct, held in a raised Four-Prong basket with sculpted leaf and petal metalwork. No accent diamonds or halo. Total diamond weight approx. 2.00 ct.

Made to order in 11 metals: silver, 10K/14K/18K gold (yellow, white, rose) and platinum.

Choose your center diamond weight and metal from the options on this page.

Look closely at the gold around this princess diamond. Rather than a plain basket, small sculpted leaves and petals rise toward the stone, following its square outline. Signora Jewels sets a 7.0 × 7.0 mm princess cut above this floral structure, with four corner prongs securing the diamond and an open gallery beneath it.

The reference center weighs approximately 2.00 ct. There are no smaller diamonds along the shoulders or around the head, so the floral detail comes entirely from the metalwork. The band stays polished and narrow, measuring approximately 1.70 mm at the bottom and 1.8–2.0 mm through the shoulders.

Design highlights

Princess Cut center diamond · approx. 2.00 ct and 7.0 × 7.0 mm
Four-Prong basket securing the square center at its corners
Sculpted floral, leaf and petal detailing around the head
Raised open gallery, approx. 6.5–7.0 mm high
Plain polished shank with no halo or accent diamonds
Customizable 1–4.5 ct center and 11 metal choices

The small leaf forms are visible between the diamond and the band, especially when the ring turns to the side. The raised setting leaves space for the floral metalwork without extending it down the entire shank. The square center remains the focus from above. Browse our engagement rings or explore other solitaire diamond rings.

Diamond & Ring Details

Specification	Details
Center diamond	Princess Cut · 7.0 × 7.0 mm · 2.00 ct
Accent diamonds	None · 0.00 ct
Total diamond weight	2.00 ct at reference size
Center options	1, 1.5, 2, 2.5, 3, 3.5, 4 and 4.5 ct
Setting	Four-Prong Basket with sculpted floral and leaf detailing
Gallery	Raised open gallery
Shoulders	Plain polished · approx. 1.8–2.0 mm
Bottom band width	Approx. 1.70 mm
Setting height	Approx. 6.5–7.0 mm
Finish	High Polish

All measurements are approximate. Center dimensions and finished metal weight vary with the selected diamond size.

About Lab Grown Diamonds

The princess cut has a square outline with pointed corners and a brilliant-style facet pattern. Four corner prongs secure its edges without surrounding the stone with a halo, while the floral goldwork sits below the diamond's face. The center is lab grown, selected to F color and VS1 clarity specifications. Learn more from our diamond and stone guide.

Metal, Care & Fit

Choose silver, 10K, 14K or 18K yellow, white or rose gold, or platinum. The narrow polished shank is smooth against neighboring fingers, while the raised basket needs care around fitted sleeves. Clean the sculpted leaf and petal sections with warm water, mild soap and a soft brush, paying attention to the small spaces beneath the center diamond. Remove the ring before heavy lifting or activities that put pressure on the prongs.

FAQ

Are the decorative leaves made from gold or diamonds?
The leaves and petals are sculpted metalwork surrounding the princess center basket. There are no additional diamonds in this design.

How are the princess cut diamond's corners protected?
Four corner prongs secure the square center diamond, holding its pointed corners within the raised basket. The floral metalwork sits around the setting rather than forming a halo.

Can I select a larger princess diamond?
Yes. The center diamond is customizable from 1 ct through 4.5 ct, including the reference 2.00 ct. The basket is made to suit the selected center dimensions.

Does the ring have a pavé band?
No. The shoulders and lower shank are plain polished metal, measuring approximately 1.8–2.0 mm across the upper band. All decorative work is concentrated around the center basket.

How should I clean the floral setting?
Use warm water, mild soap and a soft brush, gently working around the leaf-shaped metal details and underneath the open gallery. Rinse thoroughly and dry with a lint-free cloth.

Your cart is empty