Round Lab Grown Diamond Triple-Lozenge Anniversary Ring

Signora Jewelry Certificate IncludedMade to OrderInsured Delivery

round triple-lozenge diamond ring in yellow gold

1 of 12

$606.00

Price updates with your selections

Product documentation Signora Jewelry Certificate Included A Signora Jewelry Certificate lists the finished-piece and material details supplied for this design. Finished-piece and material details · Signora Jewelry Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Round Brilliant · Cluster

Center

Round Brilliant

Metal

Customizable

Setting

Cluster

Detail	Specification
Ring style	Geometric triple-lozenge anniversary ring with tapered shoulders
Diamonds	14 round Lab Grown Diamonds · Approx. 0.280 ct total
Diamond sizes	Approx. 1.45–2.00 mm
Setting	Individually prong-set round diamonds
Front height	Approx. 7.80 mm
Profile height	Approx. 3.92 mm
Lower shank width	Approx. 2.50 mm
Stone type	Lab Grown Diamond
Reference size	US 8
Finish	High Polish

Diamond details

Shape	Size	Qty	Weight (approx.)
Round central accents	2.00 mm	4	0.140 ct
Round side accents	1.45 mm	10	0.140 ct
Total	—	14	0.280 ct

At a glance

A round Lab Grown Diamond triple-lozenge anniversary ring from Signora Jewels.

Fourteen round diamonds measuring Approx. 1.45–2.00 mm total Approx. 0.280 ct across three geometric frames.

The front measures Approx. 7.80 mm high, rises Approx. 3.92 mm and narrows into an Approx. 2.50 mm lower shank.

Made to order in silver, 9K/14K/18K yellow, white or rose gold, and platinum.

Signora Jewels sets four 2.00 mm rounds inside the central lozenge, then carries ten 1.45 mm diamonds through the matching side frames. Small open cuts between the three sections keep each outline distinct, while the broad tapered shoulders hold the face square across the finger.

The polished borders sit slightly above the diamonds, helping shield their edges during daily wear. At Approx. 3.92 mm high, the setting stays compact for a ring with this much front coverage. The shank narrows to Approx. 2.50 mm at the palm, giving the hand a firm band without carrying the full shoulder width underneath.

Explore more diamond rings, review fit and styling in our men’s jewelry guide, or revise the frame proportions through our custom jewelry service.

Design highlights

14 round Lab Grown Diamonds
Approx. 0.280 ct total diamond weight
Four Approx. 2.00 mm central diamonds
Ten Approx. 1.45 mm side diamonds
Three connected lozenge-shaped frames
Individual prong settings
Broad tapered shoulders
Approx. 7.80 mm front height
Approx. 3.92 mm profile height
Approx. 2.50 mm lower shank
Reference size US 8

The central four-stone group returns the strongest flashes. The smaller side rounds pull that light outward through the two matching frames, so the pattern reads evenly from the top rather than concentrating everything in one point.

About Lab Grown Diamonds

The two diamond sizes create a measured change in scale from the center to the shoulders. Lab grown diamonds have the same crystal structure, hardness and optical properties as mined diamonds.

Metal, Care & Fit

Choose silver, 9K, 14K or 18K gold in yellow, white or rose, or platinum. Clean between the lozenge frames and beneath the prongs with warm water, mild soap and a soft brush. Rinse fully and pat dry. Remove the ring before heavy lifting, swimming or applying lotion.

FAQ

How many diamonds are set in this ring?
The ring contains 14 round Lab Grown Diamonds totaling Approx. 0.280 ct.

Is there one separately priced center diamond?
No. Four equal-size diamonds form the central group, so the full 0.280 ct is entered as accent diamond weight.

How are the diamonds arranged?
Four Approx. 2.00 mm rounds sit in the central lozenge, and ten Approx. 1.45 mm rounds fill the two side frames.

How does this geometric ring compare with a traditional signet?
This ring uses open diamond-set frames across the face, while a traditional signet usually has one solid metal table.

What is the difference between 9K and 18K gold?
9K gold contains more strengthening alloy and has a harder surface, while 18K gold contains more pure gold and carries richer color.

Can this ring be resized?
Yes. The solid lower shank gives a qualified jeweler room to resize most gold and platinum versions.

Will the broad shoulders feel bulky?
The shoulders taper into an Approx. 2.50 mm lower shank, reducing the metal width against the palm and between neighboring fingers.

Can the diamond layout or frame width be changed?
Yes. Signora Jewels can alter the lozenge proportions, shoulder width or diamond spacing through the custom design service.

Your cart is empty