Round Rose Cut Lab Grown Diamond Bezel Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 8

$552.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Round Brilliant · Bezel

Center

Round Brilliant

Carat

1 ct

Customizable

Metal

Customizable

Setting

Bezel

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Center diamond	Round Rose Cut · approx. 9.50 mm diameter · approx. 2.00 ct reference center	Choose from 1–4.5 ct
Accent diamonds	None · 0 stones · 0.00 ct	No accent diamonds across the center options
Total diamond weight	Approx. 2.00 ct · 1 stone	Matches the selected center weight
Stone type	Lab Grown Diamond	Lab Grown Diamond across all options
Diamond quality	F color · VS1 clarity	Same quality across center options
Setting	Bezel · continuous metal rim with integrated tapered shoulders	Same Bezel design; dimensions vary with center
Band	Plain lower shank with visibly textured shoulders beside the bezel	Same tapered design
Finish	High Polish bezel rim with visible shoulder texture	Same finish treatment across metals
Occasion	Engagement, Anniversary	All metal and center options

At a glance

A round rose-cut lab grown diamond bezel engagement ring from Signora Jewels.

A Bezel setting holds the approximately 2.00 ct, 9.50 mm round rose-cut reference center, with 0 accent diamonds totaling 0.00 ct. The center is

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Made to order in your chosen metal with a round rose-cut center from 1 to 4.5 ct.

Signora Jewels frames the broad triangular facets of this round rose-cut engagement ring with a full bezel instead of separate claws.

The reference center is approximately 9.50 mm across and 2.00 ct. Textured shoulders meet the reflective rim.

Design highlights

Round rose-cut reference center, approximately 2.00 ct and 9.50 mm across
Center choices from 1 to 4.5 ct, with one diamond in every option
Bezel setting with a continuous rim and no projecting prongs
Integrated tapered shoulders with visible surface texture
Lower shank estimated at 1.70 mm wide and 1.70 mm thick for the reference design
No halo, side diamonds or diamond-set shoulders

The estimated 3.5–4.2 mm shoulders taper into a 1.70 mm lower shank, keeping the metal broad beside the diamond and narrow underneath.

Diamond & Ring Details

Specification	Details
Reference center	Round Rose Cut · approx. 9.50 mm diameter · approx. 2.00 ct
Center options	1 ct, 1.5 ct, 2 ct, 2.5 ct, 3 ct, 3.5 ct, 4 ct, 4.5 ct
Reference total weight / count	Approx. 2.00 ct · 1 diamond
Accent diamonds	None · 0 stones · 0.00 ct
Setting	Bezel with a continuous rim and integrated tapered shoulders
Band width at base	Estimated 1.70 mm for the reference design
Band thickness at base	Estimated 1.70 mm for the reference design
Shoulder width	Estimated 3.5–4.2 mm near the bezel, tapering to 1.70 mm for the reference design
Setting height	Estimated 4.5–5.0 mm for the reference design
Finish	High Polish bezel rim with visible shoulder texture

Measurements are approximate references for the 2.00 ct design; final dimensions vary with the selected center.

About Lab Grown Diamonds

One round rose-cut lab grown diamond supplies the total weight, from 1 to 4.5 ct, without accent stones.

Metal, Care & Fit

Clean the rim and textured shoulders with a soft brush, following the care guidance.

FAQ

Does the full bezel cover the rose-cut center’s broad triangular facets?
The bezel surrounds the diamond’s perimeter while the broad triangular facets remain visible across its top. The continuous border is metal, not a diamond halo, and the design contains no accent stones.

Will every rose-cut center option measure 9.50 mm across?
The approximately 9.50 mm diameter describes the 2.00 ct reference center, not every option. The round rose cut and Bezel setting remain consistent, while the stone’s dimensions and setting proportions vary with the selected center.

Does the 1.70 mm lower shank establish how closely a wedding band will sit beside this bezel?
The estimated 1.70 mm width describes the lower shank; the shoulders broaden to 3.5–4.2 mm near the reference bezel. Those widths alone do not establish a flush fit. Compare a companion band against the completed setting to check the spacing.

How should I clean the textured shoulders beside the rose-cut bezel?
The shoulders have visible surface texture next to the reflective bezel rim. Use warm water, mild soap and a soft brush along that texture and where the diamond meets the rim, then rinse thoroughly and pat dry. Do not push pointed tools beneath the bezel edge.

Your cart is empty