Round Cut Lab Grown Diamond Pavé Halo Engagement Ring

Signora Jewelry Certificate IncludedMade to OrderInsured Delivery

Round lab grown diamond pavé halo engagement ring in white gold with polished prongs and diamond-set shoulders

1 of 8

$418.00

Price updates with your selections

Product documentation Signora Jewelry Certificate Included A Signora Jewelry Certificate lists the finished-piece and material details supplied for this design. Finished-piece and material details · Signora Jewelry Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

For ChristmasOrder by Monday 30 November for delivery before 25 December. Holiday gift guide

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Round Brilliant · Halo

Center

Round Brilliant

Metal

Customizable

Setting

Halo

Detail	Specifications
Center diamond	Round Brilliant Cut · approx. 3.6–3.7 mm diameter · 0.17 ct
Accent diamonds	Approx. 24–30 Round Brilliant · 0.16 ct total reported
Accent diamond size	Approx. 0.90–1.30 mm
Accent diamond quality	EF Color · VS Clarity
Total diamond weight	Approx. 0.33 ct · approx. 25–31 diamonds, subject to halo count confirmation
Stone type	Lab Grown Diamond
Setting	Halo with round center, polished prongs and fine pavé diamond surround
Shoulder design	Round pavé diamonds continuing along both shoulders
Band	Polished shank · approx. 2.60 mm wide and 2.00 mm thick at base
Setting height	Approx. 4.5–5.0 mm
Finish · Occasion	High Polish · Engagement

Diamond details

Diamond	Measurement	Quantity	Weight
Round Brilliant center	3.6–3.7 mm diameter	1	0.17 ct
Round Brilliant accents	0.90–1.30 mm	Approx. 24–30 reported	0.16 ct total
Total reported	—	Approx. 25–31	0.33 ct

The photograph shows both halo and shoulder diamonds. The supplied accent specifications do not separately allocate quantities or weights between these locations. The stated accent total is retained pending production confirmation.

At a glance

A round lab grown diamond pavé halo engagement ring from Signora Jewels.

One 0.17 ct round brilliant center measuring approximately 3.6–3.7 mm, with a pavé diamond surround and diamond-set shoulders.

Approximately 0.16 ct of reported round accents in the 0.90–1.30 mm size range; total diamond weight approximately 0.33 ct.

Made to order in 10K, 14K and 18K gold, available in yellow, white and rose gold.

Signora Jewels places a small round brilliant inside a closely set diamond halo in this engagement ring. Polished prongs hold the center, while the surrounding round diamonds form a softly squared border.

The reference center measures approximately 3.6–3.7 mm and weighs 0.17 ct. Fine round diamonds continue into both shoulders, creating a broad diamond-set surface above a 2.60 mm lower shank.

Design highlights

0.17 ct round brilliant center measuring approximately 3.6–3.7 mm
Single pavé halo with a softly squared outer outline
Polished center prongs with an exposed brilliant-cut face
Round diamond accents measuring approximately 0.90–1.30 mm
Diamond-set shoulders measuring approximately 2.60–2.80 mm wide
Substantial polished lower shank measuring approximately 2.60 mm wide

The smaller diamond sizes keep the halo compact around the center. Unlike a narrow solitaire band, the shoulders carry closely spaced diamonds across much of their visible width, continuing the halo's surface pattern toward the lower shank.

About Lab Grown Diamonds

The round brilliant center uses closely arranged facets, with smaller round diamonds repeating that cut through the halo and shoulders. Explore our diamond stone guide for more about round brilliant faceting.

Metal, Care & Fit

Choose yellow, white or rose gold in 10K, 14K or 18K purity. Gently brush around the halo, center prongs and closely set shoulder diamonds. Follow our jewelry care guide for routine cleaning.

FAQ

Does this ring have a halo around its 0.17 ct center?
Yes. The image shows small round diamonds surrounding the center in a softly squared outline. Additional round diamonds continue along both shoulders.

How large are the small accent diamonds?
The supplied accent size range is approximately 0.90–1.30 mm. The individual counts and weights for each diameter have not been separately specified.

How wide is the band beneath the diamond-set shoulders?
The lower shank is approximately 2.60 mm wide and 2.00 mm thick, while the upper shoulders measure approximately 2.60–2.80 mm across. This creates a relatively broad band compared with the 3.6–3.7 mm center diamond.

Will a straight wedding band sit flush beside the halo?
The setting height is estimated at 4.5–5.0 mm. Clearance beside the halo depends on the completed gallery and shoulder profile, so check the finished ring with the intended companion band.

How should I clean the halo and pavé shoulders?
Use warm water, mild soap and a soft brush around the center prongs and between the small round accent diamonds. Rinse thoroughly and pat dry without pulling fabric through the fine settings.

Your cart is empty