Spear Cut Lab Grown Diamond Solitaire Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 8

$477.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 0.96 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Arrives 7 business days to make, then 5–8 insured & tracked.

30-day returns Courier, insurance & duties covered. No restocking fee.

Duties & taxesPrepaid at checkout. Nothing extra to pay on delivery.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Solitaire

Center

Pear Cut

Metal

Customizable

Setting

Solitaire

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	Details
Center diamond	Spear Cut · approx. 9.64 × 5.80 × 4.06 mm · approx. 0.96 ct
Accent diamonds	None · 0 stones · 0.00 ct
Total diamond weight	Approx. 0.96 ct · 1 stone
Stone type	Lab Grown Diamond
Diamond quality	F color · VS1 clarity
Setting	Solitaire with two upper claw prongs and a rounded prong over the lower point
Band	Plain polished shank · estimated 1.50 mm wide and 1.50 mm thick at the base
Shoulder width	Estimated 1.55–1.70 mm
Setting height	Estimated 6.0–6.5 mm
Finish · Occasion	High Polish · Engagement

At a glance

A spear-cut lab grown diamond solitaire engagement ring from Signora Jewels.

One approx. 0.96 ct spear-cut center, 9.64 × 5.80 × 4.06 mm, held by two upper claws and a rounded point prong. No accents: 0 stones, 0.00 ct.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Made to order in your chosen metal with a fixed, approximately 0.96 ct spear-cut center.

Signora Jewels leaves the spear’s flat top visible between two upper claws in this engagement ring. A rounded prong caps the bottom point.

The approximately 0.96 ct center measures 9.64 × 5.80 × 4.06 mm, above a plain shank estimated at 1.50 mm wide and 1.50 mm thick at the base.

Design highlights

One spear-cut center, approximately 0.96 ct and 9.64 × 5.80 × 4.06 mm
Solitaire setting with two upper claws and a rounded point prong
Short flat top and angled upper corners, narrowing to a single lower point
Plain polished lower shank, estimated at 1.50 mm wide and 1.50 mm thick
No halo, side diamonds or diamond-set shoulders
Fixed center weight with 11 metal options

The flat upper edge and angled corners remain visible. Long sides taper toward the lower prong instead of meeting another flat end.

About Lab Grown Diamonds

One spear-cut lab grown diamond supplies the entire approximately 0.96 ct total; no diamonds line the shoulders.

Metal, Care & Fit

Yellow and rose gold emphasize the three prongs. Follow the care guidance when brushing around the spear’s pointed end.

FAQ

What covers the lower point of this spear-cut diamond?
A rounded prong covers the bottom point, while two upper claws hold the sides near the broader end. The flat top and portions of the tapered edges are not enclosed by metal. Remove the ring for lifting or activities that risk knocks to the setting.

How does this spear’s outline differ from a pear-shaped diamond?
This spear has a short flat top and angled upper corners rather than a pear’s rounded broad end. Its sides taper toward a single lower point, with no halo altering that outline.

Where should a wedding band clear the spear’s pointed end?
The lower point extends past the plain band’s outline, and its rounded prong needs clearance from a companion ring. Check the completed pair around that tip; the estimated 1.50 mm lower-shank width does not establish a flush fit.

How do I clean around the two upper claws without catching the spear’s point?
The spear has two upper claws and one rounded point prong, creating three separate metal-to-stone junctions. Use warm water, mild soap and a soft brush around each junction, then rinse thoroughly and pat dry rather than drawing a cloth across the point.

Your cart is empty